On Thursday 11 December 2008 18:59:46 Wolfgang Denk wrote: > In message Mike Frysinger you wrote: > > The term "hz" is used everywhere else when talking about the frequency of > > the SPI bus, so have the sf command use it as well to stay consistent. > > It even presents itself as "hz" when showing user help. > > > > Signed-off-by: Mike Frysinger <[email protected]> > > --- > > common/cmd_sf.c | 10 +++++----- > > 1 files changed, 5 insertions(+), 5 deletions(-) > > > > diff --git a/common/cmd_sf.c b/common/cmd_sf.c > > index 8c0a751..902e51d 100644 > > --- a/common/cmd_sf.c > > +++ b/common/cmd_sf.c > > @@ -8,8 +8,8 @@ > > > > #include <asm/io.h> > > > > -#ifndef CONFIG_SF_DEFAULT_SPEED > > -# define CONFIG_SF_DEFAULT_SPEED 1000000 > > +#ifndef CONFIG_SF_DEFAULT_HZ > > +# define CONFIG_SF_DEFAULT_HZ 1000000 > > I consider "FREQ" (and even "SPEED) a much better name than "HZ". > > "HZ" is the unit of what you are measuring, not a name for what you > are measuring.
then they should all be converted. not 90% using hz and 10% using something else. "speed" is bad as it doesnt convey the unit while "hz" is pretty clear. -mike
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
