On 12:10 Sat 03 Jan , Remy Bohmer wrote: > Hello All, > > I started a server to do only daily builds of all U-boot board > configurations. (currently on a old slow box, but it works, it takes > about 2 hours to build all boards for ARM only) > > The primary goal was to find early compile regressions in the > u-boot-USB tree that I maintain, before pushing patches to mainline. > To find a regression compared to u-boot mainline, the u-boot mainline > (master branch) also needs to build, so I build that tree also daily > from now. > > Currently I only build for ARM based boards, but there is no limit on > architectures, if I have all the cross-compilers. > I use the Denx ELDK for ARM as cross-compile toolchain. > > First, I discovered some build failures of which the logging is listed below. > What can we do about these errors? Are these boards still maintained? > Should these be fixed? Who wants to fix them? > I currently run the 'MAKEALL arm' script to build all these boards, so > either the boards should be fixed, or if no longer maintained removed > (at least from the MAKEALL script) I do the same weekly and on patch commit on arm and other arch as ppc, mips, sh4
for ARM I use different toolchains > > Further, is there any interest to make the daily build results public? > * Is it appreciated if I post the build results in a daily post to the > mailinglist, _if_ there is a build failure? (No news is good news) > What format is preferred? > * Or is it preferred to post the results on a website? > * Or ... a mail notice to the custodian will nice on new build issue and a website > ------------------------------------------------------------ > Building U-boot: > * branch: master > * src-dir: /home/remy/nightbuild/git/u-boot > ------------------------------------------------------------ > Configuring for m501sk board... > cpu/arm920t/at91rm9200/libat91rm9200.a(lowlevel_init.o): In function > `SMRDATA': > /home/remy/nightbuild/git/u-boot/cpu/arm920t/at91rm9200/lowlevel_init.S:132: > undefined reference to `MC_PUIA_VAL' > /home/remy/nightbuild/git/u-boot/cpu/arm920t/at91rm9200/lowlevel_init.S:132: > undefined reference to `MC_PUP_VAL' > /home/remy/nightbuild/git/u-boot/cpu/arm920t/at91rm9200/lowlevel_init.S:132: > undefined reference to `MC_PUER_VAL' The problem are already known and I've send patch to fix it just before my vacation > > Configuring for actux4 board... > actux4.c: In function 'board_init': > actux4.c:83: warning: left shift count >= width of type > actux4.c:83: warning: left shift count >= width of type > text data bss dec hex filename > 222576 6692 550812 780080 > be730 /home/remy/nightbuild/scratch/build/u-boot Known too > > > Configuring for ixdp425 board... > make[1]: *** No rule to make target > `/home/remy/nightbuild/scratch/build/cpu/ixp/npe/IxNpeMicrocode.o', > needed by `/home/remy/nightbuild/scratch/build/cpu/ixp/npe/libnpe.a'. > Stop. > make: *** [/home/remy/nightbuild/scratch/build/cpu/ixp/npe/libnpe.a] Error 2 we can not add the IxNpeMicrocode.c due to licencing issue a new way has be commit to allow the FW to be load from flash instead of built-in Best Regards, J. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
