I have problems with usb mass storage in u-boot.
We have our own at91sam9263 board, but I experience exactly the same problems
on the standard at91sam9263ek. And the usb-port AND memory stick works fine in
linux. I have tried both FAT and FAT32. Below follows an edited screendump of
some usb commands with a u-boot snapshot version from 13.01.2009.
I have seen that there has been done a lot of work on the usb code in the last
months, but it seems to have calmed down. Is the 2009-01-rc1 and/or the current
snapshot supposed to work? Is there anything I can do to avoid this problem?
Best regards,
Pål Bakken
And the edited screen-dump:
-----------------------------------------
U-Boot 2009.01-rc1 (jan. 13 2009 - 14:42:22)
DRAM: 64 MB
NAND: 256 MiB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 1
DUnf-Boot2009> usb start
(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... ERROR: USB-error: STALL: TD was
moved to the Done Queue because the endpoint returned a STALL PID (4)
ERROR: USB-error: STALL: TD was moved to the Done Queue because the endpoint
returned a STALL PID (4)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
:
225 more of the same error? :-)
:
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5) Device NOT ready
Request Sense returned 00 00 00
1 Storage Device(s) found
DUnf-Boot2009> usb tree
Device Tree:
1 Hub (12MBit/s, 0mA)
| OHCI Root Hub
|
|?-2 Mass Storage (12MBit/s, 100mA)
TTI-MSA USB 2.0 Mobile Disk FF04091900068
DUnf-Boot2009> usb info
1: Hub, USB Revision 1.10
- OHCI Root Hub
- Class: Hub
- PacketSize: 8 Configurations: 1
- Vendor: 0x0000 Product 0x0000 Version 0.0
Configuration: 1
- Interfaces: 1 Self Powered 0mA
Interface: 0
- Alternate Setting 0, Endpoints: 1
- Class Hub
- Endpoint 1 In Interrupt MaxPacket 2 Interval 255ms
2: Mass Storage, USB Revision 2.0
- TTI-MSA USB 2.0 Mobile Disk FF04091900068
- Class: (from Interface) Mass Storage
- PacketSize: 64 Configurations: 1
- Vendor: 0x126f Product 0x1325 Version 1.0
Configuration: 1
- Interfaces: 1 Bus Powered 100mA
- ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token
(IN) or did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
Interface: 0
- Alternate Setting 0, Endpoints: 3
- Class Mass Storage, Transp. SCSI, Bulk only
- ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token
(IN) or did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
- Endpoint 1 In Bulk MaxPacket 64
- Endpoint 2 Out Bulk MaxPacket 64
- Endpoint 3 In Interrupt MaxPacket 2 Interval 1ms
DUnf-Boot2009> usb storage
Device 0: Vendor: Rev: Prod:
Type: Removable Hard Disk
Capacity: not available
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
