Dear Guennadi Liakhovetski, In message <[email protected]> you wrote: > > a user is reporting, that setting "silent" and "baudrate" environment > variables on ARM have no effect on the console bahaviour. I didn't test > this but looking at the code it looks logical - the console is initialised > before environment variables are read. Question - is this a bug that has
This is obviously wrong, as the console baudrate is set *after* reading the "baudrate" environment variable - at least for all conforming ports. There may be broken implementations around (especially when booting from NAND), but these are just what I said: broken. > to be fixed, or is there no good fix for this, because we really want to > have console initialised ASAP - before the driver for the environment > storage is initialised? Yes, this is a bug that has to be fixed, you obviously must be able to access the environment before you can correctly configure the console port. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] If there was anything that depressed him more than his own cynicism, it was that quite often it still wasn't as cynical as real life. - Terry Pratchett, _Guards! Guards!_ _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
