You are right, there were no UPM support on U-boot-1.2.0. I used patches sended by Anton from here:
http://www.nabble.com/-PATCH-v2-0-5--mpc83xx%3A-MPC8360E-RDK-related-patches-td14717360.html#a14717487 If I use the latest upstream I will have to do a lot of validations. If a patch nand core, also I will have to validate, but just nand related things. So if it just a detail in fsl upm driver, will save a lot of time. Im using a MPC8343 board. On Thu, Jan 15, 2009 at 4:23 PM, Scott Wood <[email protected]> wrote: > On Thu, Jan 15, 2009 at 02:46:28PM -0200, Alemao wrote: >> I was using a NAND flash from ST Micro, 512 Mbit, with no problems in >> U-boot-1.2.0. > > I'm guessing that 1.2.0 was a BSP u-boot, that was not upstream. I don't > think upstream 1.2.0 had UPM NAND support. > > Could you try the latest upstream U-boot? > > What board are you using? > > -Scott > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
