2009/1/19 Wolfgang Denk <[email protected]>: > Dear Jerry Van Baren, > > In message <[email protected]> you wrote: >> >> > What do you mean by "cycle power on everything" ? >> >> The Abatron picks up its configuration file via TFTP (IIRC, otherwise >> FTP) from the host. You need to fix the file on the host so it has the >> x32 configuration. After fixing the file on the host, you need to > > No need to do that. For testing, you can change the flash > configuration of the BDI interactively using the "flash" command: > > FLASH <type> <size> <bus> change flash configuration > >> reset/cycle power on the Abatron so it re-reads the config file, > > Even if you need to reread the config file, power-cycling of the BDI > is not needed. Execute the "boot" command instead to reboot the BDI. > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] > We are Microsoft. Unix is irrelevant. Openness is futile. Prepare to > be assimilated. >
OK, found my problem... I feel ashamed... I specified my flash like this: flash I28BX8 0x200000 32 Then I have *unlocked* and erase... It worked... Sorry for having passed such a time for this. JM _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
