Thank you all for your responses. Has definitely got me going. Another really quick question. I notice that there are a lot of debug switches in the uboot code.
How do I turn on debugs in uboot. Is there a compile time flag or is there and #define that needs to be turned on. I looked in the code and could not find how all the debugs are related and can be switched on? Thank you. Regards, Vinay ----- Original Message ---- From: Wolfgang Denk <[email protected]> To: Jerry Van Baren <[email protected]> Cc: Vinay Venkataraghavan <[email protected]>; [email protected] Sent: Wednesday, January 21, 2009 11:03:39 AM Subject: Re: [U-Boot] Kernel loading and memory layout Dear Jerry Van Baren, In message <[email protected]> you wrote: > > U-Boot loads the linux kernel in RAM where ever you tell it to and then > jumps to the linux kernel entry point. The linux kernel, on start up, > relocates itself to where *it* wants to live and then proceeds. This is not correct. You load the kernel to some memory address (in RAM or flash or SRAM etc.). U-Boot will then copy (or "load") it to the address givenm in the "load address" parameter of the image file, and then jumpt to the entry point address given in the "entry point address" parameter of the image file. Normally (at leats on PowerPC), Linux will NOT relocate itself (it may set up the MMU later, but the initial execution starts exactly at the "entry point address"). Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] The sooner our happiness together begins, the longer it will last. -- Miramanee, "The Paradise Syndrome", stardate 4842.6 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
