Dear "Daniel Schuler", In message <7909dbcf0812292347x63b36946r7b7feb90dcbb5...@mail.gmail.com> you wrote: > The new SBC-2410A board from Embest now ships with 2MB NOR FLASH, > for which CONFIG_AMD_LV160 has been defined in include/configs/sbc2410x.h > > This chip is already supported in other architectures, so AMD_ID_LV160B > has been used as-is in board/sbc2410x/flash.c > > Signed-off-by: Daniel Schuler <dbschu...@gmail.com> > --- > board/sbc2410x/flash.c | 6 ++++++ > include/configs/sbc2410x.h | 21 ++++++++++++++------- > 2 files changed, 20 insertions(+), 7 deletions(-)
Your patch has been corrupted by your mailer which wrapped long lines. But I also think that's the wrong approach. Instead of spending (or more precisely wasting) efforts on that old custom flash driver you should change the code to use the generic CFI driver instead. Thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Save yourself! Reboot in 5 seconds! _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
