Dear Deven Balani, In message <bd9d98b4d828e1499d717dba564a1f270b7bf92...@eu1rdcrdc1wx031.exi.nxp.com> you wrote: > > I have a reference board design which allows user to select one of the NOR = > or NAND flash as onboard boot devices via a jumper setting. I have a regist= > er setting in the hardware which can be used to identify the boot device ty= > pe (NAND or NOR) during execution of bootloader.
Please use shorter lines - accepted line length is some 70 characters or so. > I'm interested in using u-boot to automatically check the boot device type = > (NAND or NOR) during startup, load/store environment from the detected (NAN= > D or NOR) flash device and enable supported u-boot commands for that flash = > device. That's not needed. > I need some advice on, how this mechanism is supported in u-boot? > > In other words, Is it possible to support both NAND and NOR flash as boot d= > evices in one binary image of u-boot? No, this doesn't work. You need two different images. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Es gibt immer genug fuer die Beduerfnisse aller, aber niemals genug fuer die Gier einzelner. -- Ghandi _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
