Cleanup for M5271EVB: Added clarification on the use of CONFIG_SYS_CLOCK. Modified to use u-boot's HUSH parser. Cleanup on environment settings. Removed compiler warning by defining CONFIG_SYS_CS0_*
Dependencies: Added the use of CONFIG_SYS_MCF_SYNCR for clock multiplier. This depends on a patch to include/asm-m68k/m5271.h that defines the multiplier and divider ratios. Removed the definition of CONFIG_SYS_FECI2C. This depends on a patch that removes the use of it in cpu/mcf52x2/cpu_init.c Signed-off-by: Richard Retanubun <[email protected]> --- V2: Added CONFIG_SYS_CS0_* and CONFIG_SYS_CS1_* #defines to remove compiler warnings. Based in git commit index: commit 9d8811c5bd2b7dd6307742cf22fbdb7953b6f816 Merge: 716ebf4... bd99ec1... Author: Wolfgang Denk <[email protected]> Date: Tue Feb 3 23:16:15 2009 +0100 Merge branch 'master' of git://git.denx.de/u-boot-usb include/configs/M5271EVB.h | 40 ++++++++++++++++++++++++++++++---------- 1 files changed, 30 insertions(+), 10 deletions(-) diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index 7ddeb55..50b3ab2 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -82,7 +82,10 @@ #define CONFIG_CMD_MISC #undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADB +#define CONFIG_CMDLINE_EDITING 1 /* enables command line history */ +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC @@ -116,7 +119,7 @@ #define CONFIG_SYS_I2C_OFFSET 0x00000300 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR -#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */ #define CONFIG_BOOTFILE "u-boot.bin" #ifdef CONFIG_MCFFEC # define CONFIG_NET_RETRY_COUNT 5 @@ -128,16 +131,16 @@ # define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* FEC_ENET */ -#define CONFIG_HOSTNAME M5235EVB +#define CONFIG_HOSTNAME M5271EVB #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=10000\0" \ - "u-boot=u-boot.bin\0" \ - "load=tftp ${loadaddr) ${u-boot}\0" \ + "uboot=u-boot.bin\0" \ + "load=tftp $loadaddr $uboot\0" \ "upd=run load; run prog\0" \ - "prog=prot off ffe00000 ffe2ffff;" \ - "era ffe00000 ffe2ffff;" \ - "cp.b ${loadaddr} 0 ${filesize};" \ + "prog=prot off ffe00000 ffe3ffff;" \ + "era ffe00000 ffe3ffff;" \ + "cp.b $loadaddr ffe00000 $filesize;" \ "save\0" \ "" @@ -159,7 +162,17 @@ #define CONFIG_SYS_MEMTEST_END 0x380000 #define CONFIG_SYS_HZ 1000000 + +/* Clock configuration + * The external oscillator is a 25.000 MHz + * CONFIG_SYS_CLK for ColdFire V2 sets cpu_clk (not bus_clk) + * bus_clk = (cpu_clk/2) (fixed ratio) + * + * If CONFIG_SYS_CLK is changed. the CONFIG_SYS_MCF_SYNCR must be updated to + * match the new clock speed. Max cpu_clk is 150 MHz. + */ #define CONFIG_SYS_CLK 100000000 +#define CONFIG_SYS_MCF_SYNCR (MCF_SYNCR_MFD_4X | MCF_SYNCR_RFD_DIV1) /* * Low Level Configuration Settings @@ -216,7 +229,14 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 -/* Port configuration */ -#define CONFIG_SYS_FECI2C 0xF0 +/* Chip Select 0 : Boot Flash */ +#define CONFIG_SYS_CS0_BASE 0xFFE00000 +#define CONFIG_SYS_CS0_MASK 0x001F0001 +#define CONFIG_SYS_CS0_CTRL 0x00001980 + +/* Chip Select 1 : External SRAM */ +#define CONFIG_SYS_CS1_BASE 0x30000000 +#define CONFIG_SYS_CS1_MASK 0x00070001 +#define CONFIG_SYS_CS1_CTRL 0x00001900 #endif /* _M5271EVB_H */ -- 1.5.6.5 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
