On Wed, 4 Feb 2009, Jean-Christophe PLAGNIOL-VILLARD wrote: > On 18:00 Wed 04 Feb , Guennadi Liakhovetski wrote: > > The "eet" variant of the imx31_phycore board has an OLED display, using a > > s6e63d6 display controller on the first SPI interface, using GPIO57 as a > > chip-select for it. With this configuration you can display 256 colour BMP > > images in 16-bit RGB (RGB565) LCD mode. > > > > Signed-off-by: Guennadi Liakhovetski <l...@denx.de> > > --- > > > > Jean-Christophe: another ack, please. > > > > Makefile | 6 +++- > > board/imx31_phycore/imx31_phycore.c | 51 > > +++++++++++++++++++++++++++++++++ > > include/asm-arm/arch-mx31/mx31-regs.h | 16 ++++++++++ > > include/configs/imx31_phycore.h | 23 +++++++++++++++ > > 4 files changed, 95 insertions(+), 1 deletions(-) > > > > diff --git a/Makefile b/Makefile > > index 787c5f2..6151e2c 100644 > > --- a/Makefile > > +++ b/Makefile > > @@ -3025,8 +3025,12 @@ apollon_config : unconfig > > imx31_litekit_config : unconfig > > @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31 > > > > +imx31_phycore_eet_config \ > > imx31_phycore_config : unconfig > > - @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31 > > + @if [ -n "$(findstring imx31_phycore_eet_config,$@)" ]; then > > \ > maybe just search for eet will be simplest
simplest for whom? > > + echo "#define CONFIG_IMX31_PHYCORE_EET" >> > > $(obj)include/config.h; \ > > + fi > > + @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 > > > > mx31ads_config : unconfig > > @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 > > diff --git a/board/imx31_phycore/imx31_phycore.c > > b/board/imx31_phycore/imx31_phycore.c > > index 4c64cb9..c70353d 100644 > > --- a/board/imx31_phycore/imx31_phycore.c > > +++ b/board/imx31_phycore/imx31_phycore.c > > @@ -23,6 +23,7 @@ > > > > > > #include <common.h> > > +#include <s6e63d6.h> > > #include <asm/arch/mx31.h> > > #include <asm/arch/mx31-regs.h> > > > > @@ -66,6 +67,56 @@ int board_init (void) > > return 0; > > } > > > > +#ifdef BOARD_LATE_INIT > CONFIG_? grep?: $ grep -r BOARD_LATE_INIT lib* lib_arm/board.c:#ifdef BOARD_LATE_INIT lib_nios2/board.c:#if defined(CONFIG_BOARD_LATE_INIT) lib_sh/board.c:#ifdef BOARD_LATE_INIT lib_sparc/board.c:#if defined(CONFIG_BOARD_LATE_INIT) Thanks Guennadi --- Guennadi Liakhovetski, Ph.D. DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
