Dear Vovk Konstantin, In message <[email protected]> you wrote: > This will add Ethernet interfacse to uBoot > W90P710 ARM SoC port. If you want reset > and initialize PHY KSZ8001 after MAC init, > simply add CONFIG_RESET_PHY_R define in your > board configuration file. In most cases this is > not necessarily. > --- > drivers/net/Makefile | 5 +- > drivers/net/w90p710_eth.c | 482 > +++++++++++++++++++++++++++++++++++++++++++++ > drivers/net/w90p710_eth.h | 277 ++++++++++++++++++++++++++ > include/netdev.h | 3 +- > 4 files changed, 763 insertions(+), 4 deletions(-) > create mode 100644 drivers/net/w90p710_eth.c > create mode 100644 drivers/net/w90p710_eth.h
Signed-off-by: line missing. Sorry, but we will have to reject all patches without SoB... Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] ...the increased productivity fostered by a friendly environment and quality tools is essential to meet ever increasing demands for software. - M. D. McIlroy, E. N. Pinson and B. A. Tague _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
