On 06:53 Mon 02 Feb , Dirk Behme wrote: > OMAp3 core changes necessary for MUSB > > Signed-off-by: Dirk Behme <[email protected]> > > --- > Note: OMAP3 USb code will be sent later to USB maintainer, so > CONFIG_MUSB isn't used anywhere yet. This will avoid > USB maintainer to change OMAP3 core files. > > cpu/arm_cortexa8/omap3/clock.c | 5 +++++ > include/asm-arm/arch-omap3/cpu.h | 2 ++ > include/asm-arm/arch-omap3/omap3.h | 11 +++++++++++ > 3 files changed, 18 insertions(+) > > Index: u-boot-main/cpu/arm_cortexa8/omap3/clock.c > =================================================================== > --- u-boot-main.orig/cpu/arm_cortexa8/omap3/clock.c > +++ u-boot-main/cpu/arm_cortexa8/omap3/clock.c > @@ -377,5 +377,10 @@ void per_clocks_enable(void) > sr32(&prcm_base->fclken_per, 0, 32, FCK_PER_ON); > sr32(&prcm_base->iclken_per, 0, 32, ICK_PER_ON); > > +#ifdef CONFIG_MUSB > + /* Enable the MUSB interface clock */ > + sr32(&prcm_base->iclken1_core, 4, 1, 0x1); > +#endif > + why do you enable the clock every time if you do not use it u-boot please do no enable it as done for the ethernet as example
Best Regards, J. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
