On 13:46 Tue 10 Feb , Konstantin Vovk wrote:
> Jean-Christophe PLAGNIOL-VILLARD wrote:
>> On 13:08 Mon 09 Feb , Vovk Konstantin wrote:
>>> Add support for CPU and serial communication.
>>> Interrupt not used for work with Timer0.
>>> Serial communication configured for UART0.
>>> ---
>>> cpu/arm720t/cpu.c | 48 ++++++-
>>> cpu/arm720t/interrupts.c | 82 +++++++++++-
>>> cpu/arm720t/serial.c | 115 ++++++++++++++-
>>> cpu/arm720t/start.S | 30 ++++-
>>> include/asm-arm/arch-arm720t/W90P710.h | 240
>>> +++++++++++++++++++++++++++++++
>>> include/asm-arm/arch-arm720t/hardware.h | 2 +
>>> include/asm-arm/io.h | 4 +
>>> 7 files changed, 512 insertions(+), 9 deletions(-)
>>> create mode 100644 include/asm-arm/arch-arm720t/W90P710.h
>>>
>>> diff --git a/cpu/arm720t/cpu.c b/cpu/arm720t/cpu.c
>>> index 5ac8f59..1cee570 100644
>>> --- a/cpu/arm720t/cpu.c
>>> +++ b/cpu/arm720t/cpu.c
>>> @@ -73,7 +73,7 @@ int cleanup_before_linux (void)
>>> /* go to high speed */
>>> IO_SYSCON3 = (IO_SYSCON3 & ~CLKCTL) | CLKCTL_73;
>>> #endif
>>> -#elif defined(CONFIG_NETARM) || defined(CONFIG_S3C4510B) ||
>>> defined(CONFIG_LPC2292)
>>> +#elif defined(CONFIG_NETARM) || defined(CONFIG_S3C4510B) ||
>>> defined(CONFIG_LPC2292) || defined(CONFIG_W90P710)
>> I think it's time to move to CONFIG_ reflecting the functionnality
> I do not quite understand what you want to say this.
> Please concretize what should I do?
something like CONFIG_INTERRUPT or an otherone that reflect the functionnality
and remove the SOC ifdef CONFIG_
>
>>> disable_interrupts ();
>>> /* Nothing more needed */
>>> #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
>>> @@ -253,6 +253,52 @@ int dcache_status (void)
>>> {
>>> }
>>> #elif defined(CONFIG_LPC2292) /* just to satisfy the compiler */
>>> +
>>> +#elif defined(CONFIG_W90P710)
>> I think it will be better to put in the soc specific code
>> and it's the same for the interrupt.c
> This section must be moved to a separate file that describe the W90P710 SoC?
> Where this file must be resides?
cpu/arm*/socname/interrupt.c
>>> +void icache_enable (void)
>>> +{
>>> + PUT_REG (REG_CAHCON, 0x05); /* Flush I-cache */
>>> + while (GET_REG (REG_CAHCON)); /* Wait for operation progress */
>>> +
>>> + PUT_REG (REG_CAHCNF, 0x01); /* Enable I-CACHE */
>>> +}
>>> +
>>> +void icache_disable (void)
>>> +{
>>> + PUT_REG (REG_CAHCON, 0x05); /* Flush I-cache */
>>> + while (GET_REG (REG_CAHCON)); /* Wait for operation progress */
>>> + /* Disable I-cache */
>>> + PUT_REG (REG_CAHCNF, GET_REG (REG_CAHCNF) & (~0x01));
>>> +}
>>> +{
>>> + /* Check if I-Cache enable */
>>> + return (GET_REG (REG_CAHCNF) & 0x01) != 0;
>>> +}
>>> +
>> <snip>
>>> diff --git a/cpu/arm720t/serial.c b/cpu/arm720t/serial.c
>>> index 54a9b31..e9bc652 100644
>>> --- a/cpu/arm720t/serial.c
>>> +++ b/cpu/arm720t/serial.c
>>> @@ -169,13 +169,13 @@ int serial_init (void)
>>>
>>> void serial_putc (const char c)
>>> {
>>> - if (c == '\n')
>>> - {
>>> - while((GET8(U0LSR) & (1<<5)) == 0); /* Wait for empty U0THR */
>>> + if (c == '\n') {
>>> + /* Wait for empty U0THR */
>>> + while((GET8(U0LSR) & (1<<5)) == 0);
>>> PUT8(U0THR, '\r');
>>> }
>> please do not mix coding clean style fix and add new code
> This my mistake. I don't understand why i edit LPC code.
> Maybe I check the coding style and accidentally change this section.
>>> -
>>> - while((GET8(U0LSR) & (1<<5)) == 0); /* Wait for empty U0THR */
>>> + /* Wait for empty U0THR */
>>> + while((GET8(U0LSR) & (1<<5)) == 0);
>>> PUT8(U0THR, c);
>>> }
>>>
>>> @@ -199,4 +199,109 @@ int serial_tstc (void)
>>> return (GET8(U0LSR) & 1);
>>> }
>>>
>>> +#elif defined(CONFIG_W90P710)
>> please think to put this in it's own driver or to reduce the impact of adding
>> new code to the current one
> If I put this section to the separate serial driver, where
> this file must be resides, in current directory as for netarm or in
> /drivers/serial?
yes please
>>> +
>>> +DECLARE_GLOBAL_DATA_PTR;
>>> +
>>> +#include <asm/arch/hardware.h>
>>> +
>>> +void serial_setbrg (void)
>>> +{
>>> + unsigned int divider = 0;
>>> +
>>> + /* use values for 15Mhz quarts */
>>> + switch (gd->baudrate) {
>> is it not possible to calculate it?
> Maybe this is suitabel. But more complex.
> If declare this part as universal code, it is necessary to take
> into account the current PLL settings, as well as to
> know the frequency or the external quartz or generator.
>>
>>> + case 1200: divider = 779; break;
>>> + case 2400: divider = 389; break;
>>> + case 4800: divider = 193; break;
>>> + case 9600: divider = 96; break;
>>> + case 14400: divider = 65; break;
>>> + case 19200: divider = 47; break;
>>> + case 38400: divider = 22; break;
>>> + case 57600: divider = 14; break;
>>> + case 115200: divider = 6; break;
>>> + default: hang (); break;
>> hand? is it not too much?
> In your opinion, how much it will be?
I'll just return without change the current boudrate
but if you really wish to change it
115200 I will choose by default which is most of the time the default value
>>> + }
>>> +
>>> + /* Reset LCR register and disable Uart interrupt*/
>>> + PUT_REG (REG_UART0_LCR, 0x0);
>>> + PUT_REG (REG_UART0_IER, 0x0);
>>> +
>>> + /* Set baud rate to mentioned in divider */
>>> + /* Set DLAB to '1' to access Divisor */
>>> + PUT_REG (REG_UART0_LCR, GET_REG (REG_UART0_LCR) | (1 << 7));
>>> + PUT_REG (REG_UART0_LSB, (divider & 0xFF));
>>> + PUT_REG (REG_UART0_MSB, ((divider >> 8) & 0xFF));
>>> + /* Reset DLAB to '0' to access RBR, THR, IER */
>>> + PUT_REG (REG_UART0_LCR, GET_REG (REG_UART0_LCR) & (~(1 << 7)));
>>> +
>>> + /* Set port parameters 8 bit, 1 stop, no parity */
>>> + PUT_REG (REG_UART0_LCR, GET_REG (REG_UART0_LCR) |
>>> + ((1 << 0) | (1 << 1)));
>>> +
>>> + /*
>>> + * Set the RX FIFO trigger level to 8 bytes,
>>> + * reset RX, TX FIFO, Enable FIFO
>>> + */
>>> + PUT_REG (REG_UART0_FCR, ((0x2 << 6) | (1 << 2) | (1 << 1) | (1 << 0)));
>>> +
>>> + /* Reset timeout comparator */
>>> + PUT_REG (REG_UART0_TOR, 0x0);
>>> +}
>>> +
>>> +/* Initialise the serial port with the given baudrate. Settings are 8N1 */
>>> +int serial_init (void)
>>> +{
>>> + unsigned int Temp;
>>> +
>>> + serial_setbrg ();
>>> +
>>> + /* Set GPIO_CFG to use pins PORT5_0 as TXD0 and PORT5_1 as RXD0 */
>>> + Temp = GET_REG (REG_GPIO_CFG5);
>>> + Temp |= 0X00000005;
>>> + Temp &= 0XFFFFFFF5;
>>> + PUT_REG (REG_GPIO_CFG5, Temp);
>>> + return (0);
>>> +}
>>> +
>>> +/* Check for Transmitter holding register is empty */
>>> +void CheckForUART0TXReady (void)
>>> +{
>>> + unsigned int Status;
>> please no uppercase in var name or function
>>> +
>>> + do {
>>> + Status = GET_REG (REG_UART0_LSR);
>>> + }
>>> + while (!(Status & (1 << 6))); /* Check for TE=1*/
>>> +}
>>> +
>>> +/*Put one character to Uart0 TX FIFO. Add 'LF' after 'CR'*/
>>> +void serial_putc (const char c)
>>> +{
>>> + if (c == '\n') {
>>> + /* Wait for empty THR */
>>> + CheckForUART0TXReady ();
>>> + PUT_REG (REG_UART0_TX, '\r');
>>> + }
>>> + CheckForUART0TXReady ();
>>> + PUT_REG (REG_UART0_TX, c);
>>> +}
>>> +
>>> +int serial_getc (void)
>>> +{
>>> + while ((GET_REG (REG_UART0_LSR) & 1) == 0);
>>> + return GET_REG(REG_UART0_RX);
>>> +}
>>> +
>>> +int serial_tstc (void)
>>> +{
>>> + return (GET_REG (REG_UART0_LSR) & 1);
>>> +}
>>> +
>>> +void serial_puts (const char *s)
>>> +{
>>> + while (*s) {
>>> + serial_putc (*s++);
>>> + }
>>> +}
>>> #endif
>>> diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S
>>> index 022b873..055515a 100644
>>> --- a/cpu/arm720t/start.S
>>> +++ b/cpu/arm720t/start.S
>>> @@ -1,8 +1,8 @@
>>> /*
>>> * armboot - Startup Code for ARM720 CPU-core
>>> *
>>> - * Copyright (c) 2001 Marius Gr?ger <[email protected]>
>>> - * Copyright (c) 2002 Alex Z?pke <[email protected]>
>>> + * Copyright (c) 2001 Marius Gr???ger <[email protected]>
>>> + * Copyright (c) 2002 Alex Z???pke <[email protected]>
>> why?
> I don't understand this too. I check this in next patch.
>>> *
>>> * See file CREDITS for list of people who contributed to this
>>> * project.
>>> @@ -224,6 +224,14 @@ PLLSTAT_ADR: .word PLLSTAT
>>> VPBDIV_ADR: .word VPBDIV
>>> MEMMAP_ADR: .word MEMMAP
>>>
>>> +#elif defined(CONFIG_W90P710)
>>> +
>>> +#define CAHCON 0xFFF02004 /* Cache control register */
>>> +#define AIC_MDCR 0xFFF82124 /* AIC Mask Disable Control Register */
>>> +#define CAHCNF 0xFFF02000 /* Cache configuration register
>>> */
>>> +#define IDREG 0xFFF00000 /* W90P710 CHIP ID */
>>> +#define CKSKEW 0xFFF01F00 /* Clock Skew Control register
>>> */
>>> +
>>> #endif
>>>
>>> cpu_init_crit:
>>> @@ -368,6 +376,21 @@ lock_loop:
>>> ldr r0, VPBDIV_ADR
>>> mov r1, #0x01 /* VPB clock is same as process clock */
>>> str r1, [r0]
>>> +
>>> +#elif defined(CONFIG_W90P710)
>>> + /* Disable Interrupt */
>>> + LDR r0, =AIC_MDCR
>>> + LDR r1, =0x7FFFE
>>> + STR r1, [r0]
>>> + /* Disable FIQ and IRQ */
>>> + MRS r0, CPSR
>>> + ORR r0, r0, #0xC0
>>> + MSR CPSR_c, r0
>>> + /* Disable I-Cache and D-cache entirely */
>>> + LDR r1,=CAHCNF
>>> + MOV r0, #0x0
>>> + STR r0, [r1]
>>> +
>>> #else
>>> #error No cpu_init_crit() defined for current CPU type
>>> #endif
>>> @@ -606,6 +629,9 @@ reset_cpu:
>>> .globl reset_cpu
>>> reset_cpu:
>>> mov pc, r0
>>> +#elif defined(CONFIG_W90P710)
>>> +/* Nothing done here as reseting the CPU is board specific, depending on
>>> external peripherals see lowlevel_init.c*/
>>> +
>>> #else
>>> #error No reset_cpu() defined for current CPU type
>>> #endif
>>> diff --git a/include/asm-arm/arch-arm720t/W90P710.h
>>> b/include/asm-arm/arch-arm720t/W90P710.h
>>> new file mode 100644
>>> index 0000000..c6be724
>>> --- /dev/null
>>> +++ b/include/asm-arm/arch-arm720t/W90P710.h
>>> @@ -0,0 +1,240 @@
>>> +/*
>>> + * (C) Copyright 2008
>>> + * KSL Embedded Development Team <www.kslemb.com>
>>> + * Konstantin Vovk <[email protected]>
>>> + *
>>> + * See file CREDITS for list of people who contributed to this
>>> + * project.
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation; either version 2 of
>>> + * the License, or (at your option) any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * You should have received a copy of the GNU General Public License
>>> + * along with this program; if not, write to the Free Software
>>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>>> + * MA 02111-1307 USA
>>> + *
>>> + * Description: Nuvoton W90P710 register layout definition
>>> + */
>>> +#ifndef _W90P710_H
>>> +#define _W90P710_H
>>> +
>>> +/* L1 8KB on chip SRAM base address */
>>> +#define SRAM_BASE 0xFFE00000
>>> +
>>> +#define GET_REG(reg) (*((volatile unsigned int *)(reg)))
>>> +#define PUT_REG(reg, val) (*((volatile unsigned int *)(reg))) = (unsigned
>>> int)(val)
>> please use readx/writex
>> and protect it for the ASM
> Ok. I must define this macros in this file as mentioned in /asm-i386/io.h?
> Then I must change all intrance of the GET/PUT_REG in all my stuff or
> simply redefine PUT_REG as writex? How it will be correct?
please use readx and writex instead
if they are not in the current asm-arm
please take them from linux
>>> +
>>> +/* System Address Map - Defines the register base address */
>>> +#define GCR_BA 0xFFF00000 /* Global Control */
>>> +#define EBI_BA 0xFFF01000 /* EBI Control */
>>> +#define CACHE_BA 0xFFF02000 /* Cache Control */
>>> +#define EMC_BA 0xFFF03000 /* Ethernet MAC */
>>> +#define GDMA_BA 0xFFF04000 /* GDMA control */
>>> +#define USBH_BA 0xFFF05000 /* USB Host Control */
>>> +#define USBD_BA 0xFFF06000 /* USB Device Control */
>>> +#define FMI_BA 0xFFF07000 /* Flash Memory Card Interface
>>> */
>>> +#define LCD_BA 0xFFF08000 /* Display, LCM Interface &
>>> Bypass */
>>> +#define ADO_BA 0xFFF09000 /* Audio Control */
>>> +
>>> +#define UART0_BA 0xFFF80000 /* UART0 Control (console) */
>>> +#define UART1_BA 0xFFF80100 /* UART1 Control (Bluetooth) */
>>> +#define UART2_BA 0xFFF80200 /* UART2 Control (IrDA) */
>>> +#define UART3_BA 0xFFF80300 /* UART3 Control
>>> (micro-printer) */
>>> +#define TMR_BA 0xFFF81000 /* Timer */
>>> +#define AIC_BA 0xFFF82000 /* Interrupt Controller */
>>> +#define GPIO_BA 0xFFF83000 /* GPIO Control */
>>> +#define RTC_BA 0xFFF84000 /* Real Time Clock Control */
>>> +#define SCHI0_BA 0xFFF85000 /* Smart Card Host Interface 0
>>> Control */
>>> +#define SCHI1_BA 0xFFF85800 /* Smart Card Host Interface 1
>>> Control */
>>> +#define I2C0_BA 0xFFF86000 /* I2C 0 Control */
>>> +#define I2C1_BA 0xFFF86100 /* I2C 1 Control */
>>> +#define SSP_BA 0xFFF86200 /* Synchronous Serial Port */
>>> +#define PWM_BA 0xFFF87000 /* Pulse Width Modulation
>>> Control */
>>> +#define KPI_BA 0xFFF88000 /* Keypad Interface Control */
>>> +#define PS2_BA 0xFFF89000 /* PS2 Interface Control */
>>> +
>>> +/* System Manager Control Registers */
>>> +#define REG_PDID (GCR_BA+0x0000) /* Product Identifier */
>> please add a space before and after '+'
>> and keep in mind of the 80 chars limit
> One question: Comments must be wraped too after 80 chars limit?
> I see the large number of uboot code don't wrap the comments.
yes if it's not make the code harder to read if you think it's easier to
I'm ok
>>> +#define REG_ARBCON (GCR_BA+0x0004) /* Arbitration Control */
>>> +#define REG_PLLCON (GCR_BA+0x0008) /* PLL Control */
>>> +#define REG_CLKSEL (GCR_BA+0x000C) /* Clock Select */
>>> +#define REG_PLLCON2 (GCR_BA+0x0010) /* PLL Control2 */
>>> +#define REG_I2SCKCON (GCR_BA+0x0014) /* Audio IIS Clock Control */
>>> +#define REG_IRQWAKECON (GCR_BA+0x0020) /* IRQ Wakeup Control */
>>> +#define REG_IRQWAKEFLAG (GCR_BA+0x0024) /* IRQ Wakeup Flag */
>>> +#define REG_PMCON (GCR_BA+0x0028) /* Power Manager */
>>> +#define REG_USBTXRCON (GCR_BA+0x0030) /* USB transceiver */
>>> +
>>> +/* Memory Control Registers */
>>> +#define REG_EBICON (EBI_BA+0x000) /* EBI control */
>>> +#define REG_ROMCON (EBI_BA+0x004) /* ROM/FLASH control */
>>> +#define REG_SDCONF0 (EBI_BA+0x008) /* SDRAM bank 0 configuration */
>>> +#define REG_SDCONF1 (EBI_BA+0x00C) /* SDRAM bank 1 configuration */
>>> +#define REG_SDTIME0 (EBI_BA+0x010) /* SDRAM bank 0 timing control
>>> */
>>> +#define REG_SDTIME1 (EBI_BA+0x014) /* SDRAM bank 1 timing control
>>> */
>>> +#define REG_EXT0CON (EBI_BA+0x018) /* External I/O 0 control */
>>> +#define REG_EXT1CON (EBI_BA+0x01C) /* External I/O 1 control */
>>> +#define REG_EXT2CON (EBI_BA+0x020) /* External I/O 2 control */
>>> +#define REG_EXT3CON (EBI_BA+0x024) /* External I/O 3 control */
>>> +
>>> +/* Cache Control Registers */
>>> +#define REG_CAHCNF (CACHE_BA+0x000)/* Cache configuration */
>>> +#define REG_CAHCON (CACHE_BA+0x004)/* Cache control */
>>> +#define REG_CAHADR (CACHE_BA+0x008)/* Cache address */
>>> +
>>> +/* MAC Control registers*/
>>> +#define REG_CAMCMR (EMC_BA+0x000) /* CAM Command */
>>> +#define REG_CAMEN (EMC_BA+0x004) /* CAM Enable */
>>> +#define REG_CAM0M_Base (EMC_BA+0x008)
>>> +#define REG_CAM0L_Base (EMC_BA+0x00c)
>> please use uppercase for the MACRO
> If I understood correctly, I can't mix small and large letters in the
> names of functions, variables and macros? The names of functions
> and variables should contain only lowercase letters?
correct and uppercase
>>> +
>>> +#define REG_TXDLSA (EMC_BA+0x088) /* Transmit Descriptor Link
>>> List Start Address Register */
>>> +#define REG_RXDLSA (EMC_BA+0x08C) /* Receive Descriptor Link List
>>> Start Address Register */
>>> +#define REG_MCMDR (EMC_BA+0x090) /* MAC Command */
>>> +#define REG_MIID (EMC_BA+0x094) /* MII Management Data */
>>> +#define REG_MIIDA (EMC_BA+0x098) /* MII Management Control and
>>> Address */
>>> +#define REG_FFTCR (EMC_BA+0x09C) /* FIFO Threshold Control */
>>> +#define REG_TSDR (EMC_BA+0x0a0) /* Transmit Start Demand */
>>> +#define REG_RSDR (EMC_BA+0x0a4) /* Receive Start Demand */
>>> +#define REG_DMARFC (EMC_BA+0x0a8) /* Maximum Receive Frame
>>> Control */
>>> +#define REG_MIEN (EMC_BA+0x0ac) /* MAC Interrupt Enable */
>> v> +
> Move this section to the EMC interface code?
>>> +/* MAC Status Registers */
>>> +#define REG_MISTA (EMC_BA+0x0b0) /* MAC Interrupt Status */
>>> +#define REG_MGSTA (EMC_BA+0x0b4) /* MAC General Status */
>>> +#define REG_MPCNT (EMC_BA+0x0b8) /* Missed Packet Count */
>>> +#define REG_MRPC (EMC_BA+0x0bc) /* MAC Receive Pause Count */
>>> +#define REG_MRPCC (EMC_BA+0x0c0) /* MAC Receive Pause Current
>>> Count */
>>> +#define REG_MREPC (EMC_BA+0x0c4) /* MAC Remote Pause Count */
>>> +#define REG_DMARFS (EMC_BA+0x0c8) /* DMA Receive Frame Status */
>> <snip>
>>> +
>>> +/* General-Purpose Input/Output Controller Registers */
>>> + #define GPIO_OFFSET 0x10
>> ^^^^^^^^^^^^^
>> please check you steel have some whitespace in the code
> My mistake.
>>> +/* Port 0 */
>>> +#define REG_GPIO_CFG0 (GPIO_BA+0x0000) /*
>>> Configuration */
>>> +#define REG_GPIO_DIR0 (GPIO_BA+0x0004) /* Direction
>>> control */
>>> +#define REG_GPIO_DATAOUT0 (GPIO_BA+0x0008) /* Data out */
>>> +#define REG_GPIO_DATAIN0 (GPIO_BA+0x000c) /* Data input */
>>
>>> +#endif /* _W90P710_H */
>>> diff --git a/include/asm-arm/arch-arm720t/hardware.h
>>> b/include/asm-arm/arch-arm720t/hardware.h
>>> index 3056ca7..7f31b6c 100644
>>> --- a/include/asm-arm/arch-arm720t/hardware.h
>>> +++ b/include/asm-arm/arch-arm720t/hardware.h
>>> @@ -36,6 +36,8 @@
>>> /* include armadillo specific hardware file if there was one */
>>> #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
>>> /* include IntegratorCP/CM720T specific hardware file if there was one */
>>> +#elif defined(CONFIG_W90P710)
>>> +#include <asm-arm/arch-arm720t/W90P710.h>
>>> #else
>>> #error No hardware file defined for this configuration
>>> #endif
>>> diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
>>> index fec3a7e..4e17d22 100644
>>> --- a/include/asm-arm/io.h
>>> +++ b/include/asm-arm/io.h
>>> @@ -46,6 +46,10 @@ static inline void sync(void)
>>> static inline void *
>>> map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
>>> {
>>> + #ifdef CONFIG_W90P710
>>> + if (flags == MAP_NOCACHE)
>>> + paddr |= 0x80000000;
>> why?
> This code added because W90P710 SoC has non-cacheable space
> start from 0x80000000. We use IDE as memory mapped. When cache enabled
> there was an error for read/write operation.
so could you do it in a seperate commit please and as this explaination in the
commit message
Best Regards,
J.
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
