Dear Kim, Andy & Jon, I have the following patches still marked as open in my list. Could you please have a look...
8xxx: 11/06 Anton Vorontsov [U-Boot] [PATCH] mpc83xx: increase BOOTMAPSZ to 16MB 12/11 Paul Gortmaker [U-Boot] [PATCH] tsec: report when there is no vendor specific PHY support. 12/30 Poonam_Aggrwal-b1 [U-Boot] [PATCH][u-boot-85xx]The 32bit errata fix for 8572 for DDR2 (fwd) 01/15 hamoshame Lamotek [U-Boot] MPC8572DS Registered DDR2 support. 01/22 Pieter [U-Boot] Custom MPC8548 boot using FDT problem 01/22 Scott Wood Re: [U-Boot] mpc8313erdb: crash in image_print_type() 02/04 Jon Loeliger Re: [U-Boot] [PATCH 4/8] mpc86xx: Add support to populate addr map based on BATs 02/04 Jon Loeliger Re: [U-Boot] [PATCH 8/8] mpc8641hpcn: Change PCI MEM pci bus address 02/04 Jon Loeliger Re: [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up outbound pci windows before inbound 02/04 Jon Loeliger Re: [U-Boot] [PATCH 5/8] mpc8641hpcn: Clean up PCI mapping concepts 02/05 Valeriy Glushkov [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334 02/10 "Ajeesh Kumar" U-boot level MPC8548 Ethernet internal/External Loop back testing 02/12 Becky Bruce [U-Boot] [PATCH] mpc8641hpcn: Indicate 36-bit addr map in boot messages 02/12 Becky Bruce [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default 02/12 Becky Bruce Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default 02/12 Jon Loeliger Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default 02/16 Kim Phillips Re: [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334 02/17 Heiko Schocher [U-Boot] [PATCH 03/12 v2] 83xx, kmeter1: add I2C, dtt, eeprom support 02/17 Heiko Schocher [U-Boot] [PATCH 08/12 v2] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1 02/17 Heiko Schocher [U-Boot] [PATCH 09/12 v2] 8360, kmeter1: added bootcount feature. 02/17 Kumar Gala [U-Boot] [PATCH] fsl: Don't spew messages related to PHY fixup of device tree 02/19 Anton Vorontsov [U-Boot] [PATCH 0/7] Some PCIe patches for MPC83xx 02/19 Anton Vorontsov [U-Boot] [PATCH 1/7] mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal 02/19 Anton Vorontsov [U-Boot] [PATCH 2/7] PCI: Add pci_last_busno() helper 02/19 Anton Vorontsov [U-Boot] [PATCH 3/7] mpc83xx: PCIe: Don't start bus enumeration at 0 02/19 Anton Vorontsov [U-Boot] [PATCH 4/7] mpc83xx: PCIe: Fix CONFIG_PCI_SCAN_SHOW reporting bogus values 02/19 Anton Vorontsov [U-Boot] [PATCH 5/7] mpc83xx: PCI: Fix bus-range fdt fixups for PCI1 controllers 02/19 Anton Vorontsov [U-Boot] [PATCH 6/7] mpc83xx: PCI: Fix hard-coded first_busno value 02/19 Anton Vorontsov [U-Boot] [PATCH 7/7] mpc83xx: MPC837XERDB: Add PCIe support 02/19 Heiko Schocher [U-Boot] [PATCH 3/9 v3] 83xx, kmeter1: add I2C, dtt, eeprom support 02/19 Heiko Schocher [U-Boot] [PATCH 5/9 v3] 83xx, kmeter1: autodetect size of DDR II RAM 02/19 Heiko Schocher [U-Boot] [PATCH 4/9 v3] 83xx, i2c: add mux support for fsl_i2c 02/19 Heiko Schocher [U-Boot] [PATCH 6/9 v3] 83xx: add missing TIMING_CFG1_CASLAT_* defines 02/19 Heiko Schocher [U-Boot] [PATCH 7/9 v3] 83xx, kmeter1: updates for 2009.03 02/19 Heiko Schocher [U-Boot] [PATCH 8/9 v3] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1 02/19 Heiko Schocher [U-Boot] [PATCH 9/9 v3] 8360, kmeter1: added bootcount feature. Thanks in advance. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Anything free is worth what you pay for it. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
