On 01:00 Sun 22 Feb , Wolfgang Denk wrote: > Dear Jean-Christophe, > > I have the following patches still marked as open in my list. Could > you please have a look... > > ARM, AT91: > > 04/24 michael [U-Boot-Users] [PATCH ARM 0/2] Ide support > 04/24 michael [U-Boot-Users] [PATCH ARM 1/2] Ide support io > function > 04/24 michael [U-Boot-Users] [PATCH ARM 2/2] Ide support. Ide > registration > 08/15 Sergey Lapin [U-Boot] [PATCH][Re-submit] Hardware watchdog > support for AT91SAM9260 CPU at91 watchdog support already mainline > 08/28 Markus Kammerstet [U-Boot] PATCH: U-Boot support for Olimex SAM9L-9260 > development board > 10/07 "Alan Carvalho de [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND > Flash code to RAM > 10/07 "Alan Carvalho de [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK > board boots from NAND Flash > 10/13 "Roman Mashak" [U-Boot] [PATCH] ARM926EJ-S: relocate OMAP specific > 'cpuinfo.c' into OMAP directory applied > 10/21 Tomohiro Masubuch [U-Boot] [PATCH v4] Add support for KMC KZM-ARM11-01 > board > 10/23 Magnus Lilja [U-Boot] [PATCH 1/2] i.MX31: Use do_div for some > calculations. > 10/23 Magnus Lilja [U-Boot] [PATCH 2/2] i.MX31: Add basic support for > Freescale's i.MX31 PDK board. > 11/07 Ilko Iliev [U-Boot] [PATCH] at91: add support for PM9261 board need fix > 11/13 Chaofu Chen [U-Boot] [PATCH] bug fix for the delay function of > ARM s3c44b0 > 11/21 Hugo Villeneuve [U-Boot] [PATCH 1/1] ARM DaVinci: Add common > peripherals and modules enable functions. > 11/26 Jens Scharsig [U-Boot] [PATCH] AT91RM9200 BGA port D defines > 12/04 Stefan Althoefer [U-Boot] [PATCH] ARM: add IDE init to > lib_arm/board.c Part 1/1 > 12/11 Rohit Hagargundgi [U-Boot] [PATCH v2 2/4] Environment support for > Flex-OneNAND > 12/11 Rohit Hagargundgi [U-Boot] [PATCH v2 3/4] JFFS2 commands support for > Flex-OneNAND > 12/11 Rohit Hagargundgi [U-Boot] [PATCH v2 4/4] Flex-OneNAND boundary > setting command > 12/11 Rohit Hagargundgi [U-Boot] [PATCH 0/3] Bad blocks and Partition > support for OneNAND / Flex-OneNAND > 12/11 Rohit Hagargundgi [U-Boot] [PATCH 1/3] Bad block support for > environment variables partition in OneNAND > 12/11 Rohit Hagargundgi [U-Boot] [PATCH 2/3] Add partition based OneNAND > commands > 12/11 Rohit Hagargundgi [U-Boot] [PATCH 3/3] Create bad block aware > partition table > 12/13 Jean-Christophe P [U-Boot] [PATCH] integratorap: fix PCI support > 12/14 Dirk Behme [U-Boot] [PATCH 01/15 v6] OMAP3: Add pin mux, clock > and cpu headers omap3 first sereies already mainline > 12/14 Dirk Behme [U-Boot] [PATCH 05/15 v6] OMAP3: Add common board, > interrupt and system info > 12/17 Peter Tyser [U-Boot] [PATCH v6 0/3] Support for XPedite5370 and > misc GPIO > 01/07 Ulf Samuelsson [U-Boot] [PATCH 1/1] ARM: Add command to control > coloured led from the console > 01/20 Ben Warren Re: [U-Boot] [PATCH] Add support W90P710 ARM SoC > from Nuvoton > 01/22 Jean-Christophe P [U-Boot] [PATCH] at91rm9200: move serial driver to > drivers/serial > 01/22 Jean-Christophe P [U-Boot] [PATCH 0/2] at91sam9: add watchdog support > 01/22 Jean-Christophe P [U-Boot] [PATCH 2/2] at91sam9263ek: active watchdog > support via at91sam9263ek_wdt_config > 01/22 Jean-Christophe P [U-Boot] [PATCH 1/2] at91sam9: add watchdog support > 01/24 Michael Roth [U-Boot] Patches for new at91 board / lowlevel_init.S NACK > 01/25 Michael Roth Re: [U-Boot] Patches for new at91 board / > lowlevel_init.S NACK > 01/25 Jason Kridner [U-Boot] [PATCH v2 0/5] OMAP3: Add OMAP3 board > support > 01/25 Jason Kridner [U-Boot] [PATCH v2 1/5] OMAP3: Add common power > code, README, and BeagleBoard > 01/25 Jason Kridner [U-Boot] [PATCH v2 2/5] OMAP3: Add Overo board > 01/25 Jason Kridner [U-Boot] [PATCH v2 3/5] OMAP3: Add EVM board > 01/25 Jason Kridner [U-Boot] [PATCH v2 4/5] OMAP3: Add Pandora support > 01/25 Jason Kridner [U-Boot] [PATCH v2 5/5] OMAP3: Add Zoom1 board > support > 01/26 Magnus Lilja Re: [U-Boot] [PATCH v3 0/6] i.MX31: Add NAND support > and new PDK board. > 01/27 Dirk Behme [U-Boot] [PATCH v3 1/5] OMAP3: Add common power > code, README, and BeagleBoard > 02/01 Jean-Christophe P [U-Boot] [PATCH] at91sam9xeek: fix soc name > 02/01 Jean-Christophe P [U-Boot] [PATCH 2/2] at91sam9263ek: active watchdog > support via at91sam9263ek_wdt_config > 02/01 Jean-Christophe P [U-Boot] [PATCH 1/2] at91sam9: add watchdog support > 02/02 Dirk Behme [U-Boot] [PATCH 3/7] OMAP3: Add OMAP3 auto detection > 02/02 Dirk Behme [U-Boot] [PATCH 6/7] OMAP3: Add OMAP3 core changes > for MUSB > 02/02 Dirk Behme [U-Boot] [PATCH 7/7] OMAP3: Clean up MMC code > 02/03 Jean-Christophe P [U-Boot] [PATCH] integratorap: fix PCI support > 02/05 Grazvydas Ignotas Re: [U-Boot] [PATCH 4/7] OMAP3: Pandora: Update pin > mux > 02/06 Michael Roth [U-Boot] [PATCH] at91: CONFIG_USART3 renamed to > CONFIG_USART_DBGU > 02/06 Michael Roth [U-Boot] [PATCH] at91: Factored out common serial > hardware initialization > 02/06 Jean-Christophe P Re: [U-Boot] [PATCH] at91: Factored out common > serial hardware initialization > 02/06 Mark Jackson Re: [U-Boot] [PATCH 1/1] Setup extra MIMC200 chip > selects > 02/06 Jean-Christophe P Re: [U-Boot] [PATCH] Add support W90P710 ARM SoC > from Nuvoton > 02/07 Anatolij Gustschi [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver for > shorter than 32 bit go throught video tree with the video patsh set > 02/07 Jean-Christophe P Re: [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver > for shorter than 32 bit > 02/07 Anatolij Gustschi Re: [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver > for shorter than 32 bit > 02/07 Anatolij Gustschi [U-Boot] [PATCH 2/9 v4] i.MX31: add a simple gpio > driver > 02/09 Alessandro Rubini [U-Boot] [PATCH 1/3] Added nomadik.h header > 02/10 Fabio Porcedda [U-Boot] Atmel AT91 USB Device Controller Driver > 02/10 Remy Bohmer Re: [U-Boot] Atmel AT91 USB Device Controller Driver > 02/11 Remy Bohmer Re: [U-Boot] Atmel AT91 USB Device Controller Driver > 02/12 Dirk Behme [U-Boot] [PATCH 0/7 v2] OMAP3: Add some additional > improvements and fixes > 02/12 Dirk Behme Re: [U-Boot] [PATCH 6/7] OMAP3: Add OMAP3 core > changes for MUSB > 02/12 Dirk Behme [U-Boot] [PATCH 4/7 v2] OMAP3: Pandora: Update pin > mux > 02/12 Dirk Behme [U-Boot] [PATCH 3/7 v2] OMAP3: Add OMAP3 auto > detection > 02/12 Dirk Behme [U-Boot] [PATCH 7/7 v2] OMAP3: Clean up MMC code > 02/12 Dirk Behme [U-Boot] [PATCH 1/7 v2] OMAP3: Overo: Clean up pin > mux and GPIO configuration > 02/12 Dirk Behme [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core > changes for MUSB > 02/12 Dirk Behme [U-Boot] [PATCH 2/7 v2] OMAP3: Beagle: Add board > revision detection > 02/12 Dirk Behme Re: [U-Boot] [PATCH 5/7] OMAP3: Add serial number > based on die ID > 02/12 Dirk Behme [U-Boot] [PATCH 5/7 v2] OMAP3: Add serial number > based on die ID > 02/13 Grzegorz Bernacki [U-Boot] [PATCH v6] Add support for the digsy MTC > board. > 02/13 Mark Jackson [U-Boot] [PATCH 1/1 v2] Setup extra MIMC200 chip > selects > 02/16 Fabio Porcedda Re: [U-Boot] Atmel AT91 USB Device Controller Driver > 02/17 Hugo Villeneuve Re: [U-Boot] [PATCH 1/1] ARM DaVinci: Add common > peripherals andmodules enable functions. > 02/19 [email protected] [U-Boot] [PATCH] Davinci I2C code cleanup > 02/19 Tom Re: [U-Boot] [PATCH] ARM:OMAP3 Change mmc_init to > mmc_legacy_init > 02/20 yanfeng qin [U-Boot] [PATH] ARM:OMAP3 Add OTG host support > 02/20 yanfeng qin [U-Boot] [PATCH] ARM:OMAP3 Add OTG host support can't apply and need fix > 02/20 Dirk Behme [U-Boot] [PATCH 7/7 v3] OMAP3: Clean up MMC code > > PXA: > > 12/03 Daniel Mack Re: [U-Boot] [PATCH] PXA3xx: fix CKEN[AB] > > IXP: > > 12/04 Stefan Althoefer [U-Boot] [PATCH] IXP425: Add new IXP425 board > emPC-A400 Part 2/2 > 12/04 Stefan Althoefer [U-Boot] [PATCH] IXP425: Add new IXP425 board > emPC-A400 Part 1/2 > 12/20 Stefan Althoefer [U-Boot] [Bug] IXP425 and e1000 network driver IXP wait new version
Best Regards, J. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
