On Monday 23 February 2009 01:34:32 pm Guennadi Liakhovetski wrote: > The "eet" variant of the imx31_phycore board has an OLED display, using a > s6e63d6 display controller on the first SPI interface, using GPIO57 as a > chip-select for it. With this configuration you can display 256 colour BMP > images in 16-bit RGB (RGB565) LCD mode. > > Signed-off-by: Guennadi Liakhovetski <l...@denx.de> > --- > > On Mon, 23 Feb 2009, Anatolij Gustschin wrote: > > can you please address comments from Jean-Christophe to this 9/9 v3 > > patch? I'm steel waiting for ACK from Jean-Christophe for 1/9 v4, 2/9 v4 > > and 9/9 v3 patches from this series. > > Oops, sorry, I was sure I had sent it already. > > Changes since v1: adjusted to reflect changes in earlier patches: add .id > field initialisation, configuration parameter renamed to CONFIG_S6E63D6. > Changes since v2: fixed the left-over CONFIG_DISPLAY_S6E63D6 parameter. > Changes since v3: added a comment to clarify the SPI chipselect value. > > Makefile | 6 +++- > board/imx31_phycore/imx31_phycore.c | 57 > +++++++++++++++++++++++++++++++++ include/asm-arm/arch-mx31/mx31-regs.h | > 16 +++++++++ > include/configs/imx31_phycore.h | 23 +++++++++++++ > 4 files changed, 101 insertions(+), 1 deletions(-)
Applied to u-boot-video/master, also fixed by s/imx31_phycore_eet_config,/_eet_,/ Thanks, Anatolij _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
