From: Gabe Black <gabebl...@chromium.org>
We don't want this for coreboot, so provide a way of compiling it out.
Signed-off-by: Gabe Black <gabebl...@chromium.org>
Signed-off-by: Stefan Reinauer <reina...@chromium.org>
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v3:
- Check for CONFIG_X86_NO_REAL_MODE in the zimage code
Changes in v2:
- Rename real mode option to CONFIG_X86_NO_REAL_MODE
README | 6 ++++++
arch/x86/lib/Makefile | 9 ++++++---
arch/x86/lib/video.c | 2 ++
arch/x86/lib/zimage.c | 4 ++--
4 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/README b/README
index b9a3685..ed7d270 100644
--- a/README
+++ b/README
@@ -3668,6 +3668,12 @@ Low Level (hardware related) configuration options:
If defined, the x86 reset vector code is excluded. You will need
to do this when U-Boot is running from Coreboot.
+- CONFIG_X86_NO_REAL_MODE
+ If defined, x86 real mode code is omitted. This assumes a
+ 32-bit environment where such code is not needed. You will
+ need to do this when U-Boot is running from Coreboot.
+
+
Freescale QE/FMAN Firmware Support:
-----------------------------------
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 51836da..4325b25 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -25,11 +25,16 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(ARCH).o
+ifeq ($(CONFIG_X86_NO_REAL_MODE),)
SOBJS-$(CONFIG_SYS_PC_BIOS) += bios.o
SOBJS-$(CONFIG_SYS_PCI_BIOS) += bios_pci.o
-SOBJS-$(CONFIG_SYS_X86_REALMODE) += realmode_switch.o
+COBJS-y += realmode.o
+SOBJS-y += realmode_switch.o
COBJS-$(CONFIG_SYS_PC_BIOS) += bios_setup.o
+COBJS-$(CONFIG_VIDEO) += video_bios.o
+endif
+
COBJS-y += board.o
COBJS-y += bootm.o
COBJS-y += cmd_boot.o
@@ -41,11 +46,9 @@ COBJS-$(CONFIG_SYS_PCAT_INTERRUPTS) += pcat_interrupts.o
COBJS-$(CONFIG_SYS_GENERIC_TIMER) += pcat_timer.o
COBJS-$(CONFIG_PCI) += pci.o
COBJS-$(CONFIG_PCI) += pci_type1.o
-COBJS-$(CONFIG_SYS_X86_REALMODE) += realmode.o
COBJS-y += relocate.o
COBJS-y += string.o
COBJS-$(CONFIG_SYS_X86_ISR_TIMER) += timer.o
-COBJS-$(CONFIG_VIDEO) += video_bios.o
COBJS-$(CONFIG_VIDEO) += video.o
COBJS-$(CONFIG_CMD_ZBOOT) += zimage.o
diff --git a/arch/x86/lib/video.c b/arch/x86/lib/video.c
index 3d6b24d..20e2416 100644
--- a/arch/x86/lib/video.c
+++ b/arch/x86/lib/video.c
@@ -222,8 +222,10 @@ int video_init(void)
int drv_video_init(void)
{
+#ifndef CONFIG_X86_NO_REAL_MODE
if (video_bios_init())
return 1;
+#endif
return video_init();
}
diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c
index 2214286..b8c672b 100644
--- a/arch/x86/lib/zimage.c
+++ b/arch/x86/lib/zimage.c
@@ -171,7 +171,7 @@ struct boot_params *load_zimage(char *image, unsigned long
kernel_size,
else
*load_address = (void *)ZIMAGE_LOAD_ADDR;
-#if defined CONFIG_ZBOOT_32
+#if (defined CONFIG_ZBOOT_32 || defined CONFIG_X86_NO_REAL_MODE)
printf("Building boot_params at 0x%8.8lx\n", (ulong)setup_base);
memset(setup_base, 0, sizeof(*setup_base));
setup_base->hdr = params->hdr;
@@ -237,7 +237,7 @@ int setup_zimage(struct boot_params *setup_base, char
*cmd_line, int auto_boot,
struct setup_header *hdr = &setup_base->hdr;
int bootproto = get_boot_protocol(hdr);
-#if defined CONFIG_ZBOOT_32
+#if (defined CONFIG_ZBOOT_32 || defined CONFIG_X86_NO_REAL_MODE)
setup_base->e820_entries = install_e820_map(
ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map);
#endif
--
1.7.7.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
