On 11/30/2012 17:18, [email protected] wrote:
From: Richard Genoud <[email protected]>
Signed-off-by: Richard Genoud <[email protected]>
Acked-by: Bo Shen <[email protected]
---
arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 13 +++++++++++++
arch/arm/include/asm/arch-at91/at91sam9x5.h | 2 ++
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 3 +++
drivers/usb/host/ohci-at91.c | 6 ++++--
4 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
index 9348552..0448c0b 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
@@ -193,6 +193,19 @@ void at91_spi1_hw_init(unsigned long cs_mask)
}
#endif
+#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI)
+void at91_uhp_hw_init(void)
+{
+ /* Enable VBus on UHP ports */
+ at91_set_pio_output(AT91_PIO_PORTD, 18, 0); /* port A */
+ at91_set_pio_output(AT91_PIO_PORTD, 19, 0); /* port B */
+#if defined(CONFIG_USB_OHCI_NEW)
+ /* port C is OHCI only */
+ at91_set_pio_output(AT91_PIO_PORTD, 20, 0); /* port C */
+#endif
+}
+#endif
+
#ifdef CONFIG_MACB
void at91_macb_hw_init(void)
{
diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h
b/arch/arm/include/asm/arch-at91/at91sam9x5.h
index 0e728c9..de0f1b1 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9x5.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h
@@ -154,6 +154,8 @@
#define ATMEL_PIO_PORTS 4
#define CPU_HAS_PIO3
#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */
+#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
+#define ATMEL_ID_UHP ATMEL_ID_UHPHS
/*
* at91sam9x5 specific prototypes
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
index edb0886..8773e6f 100644
--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
@@ -295,6 +295,9 @@ int board_init(void)
at91_macb_hw_init();
#endif
+#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI)
+ at91_uhp_hw_init();
+#endif
#ifdef CONFIG_LCD
at91sam9x5ek_lcd_hw_init();
#endif
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 9532dd9..efd711d 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -41,7 +41,8 @@ int usb_cpu_init(void)
writel(get_pllb_init(), &pmc->pllbr);
while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
;
-#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
+ defined(CONFIG_AT91SAM9X5)
/* Enable UPLL */
writel(readl(&pmc->uckr) | AT91_PMC_UPLLEN | AT91_PMC_BIASEN,
&pmc->uckr);
@@ -81,7 +82,8 @@ int usb_cpu_stop(void)
writel(0, &pmc->pllbr);
while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0)
;
-#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
+ defined(CONFIG_AT91SAM9X5)
/* Disable UPLL */
writel(readl(&pmc->uckr) & (~AT91_PMC_UPLLEN), &pmc->uckr);
while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU)
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
