On 12/05/2012 11:15 PM, Daniel Stodden wrote:
On Sun, 2012-12-02 at 20:15 +0100, Luka Perkov wrote:
On Sun, Dec 02, 2012 at 03:36:22PM +0100, Sebastian Hesselbarth wrote:
On Dove kwboot can also be used to boot an u-boot image into RAM.
In contrast to Kirkwood, Dove does not support the UART boot mode
sequence but requires the UART boot mode to be selected through
strap pins. The SolidRun CuBox has a push button to allow uart
boot mode but fails on the boot sequence sent by kwboot.
...
since the protocol remains the same, and just doesn't take a boot
message while polling, better to keep the bootmsg_call() intact and just
make the option parsing flip the message type?
The original BootROM had a couple more message, the tool just no
immediate use for that. Eventual options to change message type wasn't
unanticipated. Ok, no message at all was.
Sketchy patch attached for your consideration. Beware, I can't test it
right now.
Hi Daniel,
I tried your patch and except that you forgot to add 'n' to the getopt
call, it works as expected.
Also, while I've got nothing against adding a flag for that, I'm partly
wondering whether this took a patch at all -- what's the target behavior
if you keep shooting it with the original boot message?
I would assume it would keep responding with NAKs. But doesn't?
I tried original kwboot and it failed, then I checked the DS for the boot
sequence and finally found out, that Dove doesn't support the "force into
UART boot mode" sequence. But your are right, if I reboot Dove into UART
boot mode it makes no difference if you send the sequence or not. It works
on both kwboot modes.
It just doesn't work if you are doing a normal boot of Dove, as it ignores
the sequence sent.
So finally, we have three options:
- leave kwboot as is and hope the user will know about Dove's inability to
use the boot sequence
- add a note to usage() and kwboot that Dove doen't like the sequence
- add an option to kwboot as you are proposing
Sebastian
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
