Hi Minkyu Kang, On Wed, Dec 26, 2012 at 5:24 PM, Minkyu Kang <mk7.k...@samsung.com> wrote:
> Dear Rajeshwari Shinde, > > On 14/12/12 20:56, Rajeshwari Shinde wrote: > > Functions added to get the I2C bus number and reset I2C bus using > > FDT node. > > > > Signed-off-by: Rajeshwari Shinde <rajeshwar...@samsung.com> > > Acked-by: Simon Glass <s...@chromium.org> > > Acked-by: Heiko Schocher <h...@denx.de> > > --- > > Changes in V1: > > -Rebased on latest u-boot-samsung > > drivers/i2c/s3c24x0_i2c.c | 83 > ++++++++++++++++++++++++++++++++++++++++++++- > > drivers/i2c/s3c24x0_i2c.h | 8 ++++ > > include/i2c.h | 26 ++++++++++++++ > > 3 files changed, 116 insertions(+), 1 deletions(-) > > > > diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c > > index 9bc4c7f..94a093e 100644 > > --- a/drivers/i2c/s3c24x0_i2c.c > > +++ b/drivers/i2c/s3c24x0_i2c.c > > @@ -27,9 +27,11 @@ > > */ > > > > #include <common.h> > > +#include <fdtdec.h> > > #ifdef CONFIG_EXYNOS5 > > #include <asm/arch/clk.h> > > #include <asm/arch/cpu.h> > > +#include <asm/arch/pinmux.h> > > #else > > #include <asm/arch/s3c24x0_cpu.h> > > #endif > > @@ -60,7 +62,14 @@ > > #define I2C_TIMEOUT 1 /* 1 second */ > > > > > > -static unsigned int g_current_bus; /* Stores Current I2C Bus */ > > +/* > > + * For SPL boot some boards need i2c before SDRAM is initialised so > force > > + * variables to live in SRAM > > + */ > > +static unsigned int g_current_bus __attribute__((section(".data"))); > > +static struct s3c24x0_i2c_bus i2c_bus[CONFIG_MAX_I2C_NUM] > > + __attribute__((section(".data"))); > > +static int i2c_busses __attribute__((section(".data"))); > > > > #ifndef CONFIG_EXYNOS5 > > static int GetI2CSDA(void) > > @@ -507,4 +516,76 @@ int i2c_write(uchar chip, uint addr, int alen, > uchar *buffer, int len) > > (i2c, I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer, > > len) != 0); > > } > > + > > +#ifdef CONFIG_OF_CONTROL > > +void board_i2c_init(const void *blob) > > +{ > > + > > please remove this blank line. > > > + int node_list[CONFIG_MAX_I2C_NUM]; > > + int count, i; > > + > > + count = fdtdec_find_aliases_for_id(blob, "i2c", > > + COMPAT_SAMSUNG_S3C2440_I2C, node_list, > > + CONFIG_MAX_I2C_NUM); > > need blank line here. > > > + for (i = 0; i < count; i++) { > > + struct s3c24x0_i2c_bus *bus; > > + int node = node_list[i]; > > How handle if the value of count is bigger than CONFIG_MAX_I2C_NUM? > CONFIG_MAX_I2C_NUM is maximum number of I2C lines supported. if count bigger than CONFIG_MAX_I2C_NUM then it is error. So you want me to add a check here? > > > + > > + if (node <= 0) > > + continue; > > + bus = &i2c_bus[i]; > > + bus->regs = (struct s3c24x0_i2c *) > > + fdtdec_get_addr(blob, node, "reg"); > > + bus->id = pinmux_decode_periph_id(blob, node); > > + bus->node = node; > > + bus->bus_num = i2c_busses++; > > + exynos_pinmux_config(bus->id, 0); > > + } > > + > > please remove this blank line. > > > +} > > + > > +static struct s3c24x0_i2c_bus *get_bus(unsigned int bus_idx) > > +{ > > + if (bus_idx < i2c_busses) > > + return &i2c_bus[bus_idx]; > > need blank line here. > > > + debug("Undefined bus: %d\n", bus_idx); > > + return NULL; > > +} > > + > > +int i2c_get_bus_num_fdt(int node) > > +{ > > + int i; > > + > > + for (i = 0; i < i2c_busses; i++) { > > + if (node == i2c_bus[i].node) > > + return i; > > + } > > + > > + debug("%s: Can't find any matched I2C bus\n", __func__); > > + return -1; > > +} > > + > > +int i2c_reset_port_fdt(const void *blob, int node) > > +{ > > + struct s3c24x0_i2c_bus *i2c; > > + > > Please remove this blank line. > > > + int bus; > > + > > + bus = i2c_get_bus_num_fdt(node); > > + if (bus < 0) { > > + debug("could not get bus for node %d\n", node); > > + return -1; > > + } > > need blank line here. > > > + i2c = get_bus(bus); > > + if (!i2c) { > > + debug("get_bus() failed for node node %d\n", node); > > + return -1; > > + } > > + > > + i2c_ch_init(i2c->regs, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); > > + > > + return 0; > > +} > > +#endif > > + > > #endif /* CONFIG_HARD_I2C */ > > diff --git a/drivers/i2c/s3c24x0_i2c.h b/drivers/i2c/s3c24x0_i2c.h > > index 2dd4b06..1243bf1 100644 > > --- a/drivers/i2c/s3c24x0_i2c.h > > +++ b/drivers/i2c/s3c24x0_i2c.h > > @@ -30,4 +30,12 @@ struct s3c24x0_i2c { > > u32 iicds; > > u32 iiclc; > > }; > > + > > +struct s3c24x0_i2c_bus { > > + int node; /* device tree node */ > > + int bus_num; /* i2c bus number */ > > + struct s3c24x0_i2c *regs; > > + enum periph_id id; > > +}; > > + > > #endif /* _S3C24X0_I2C_H */ > > diff --git a/include/i2c.h b/include/i2c.h > > index 16f099d..c60d075 100644 > > --- a/include/i2c.h > > +++ b/include/i2c.h > > @@ -262,4 +262,30 @@ extern int get_multi_scl_pin(void); > > extern int get_multi_sda_pin(void); > > extern int multi_i2c_init(void); > > #endif > > + > > +/** > > + * Get FDT values for i2c bus. > > + * > > + * @param blob Device tree blbo > > + * @return the number of I2C bus > > + */ > > +void board_i2c_init(const void *blob); > > + > > +/** > > + * Find the I2C bus number by given a FDT I2C node. > > + * > > + * @param blob Device tree blbo > > + * @param node FDT I2C node to find > > + * @return the number of I2C bus (zero based), or -1 on error > > + */ > > +int i2c_get_bus_num_fdt(int node); > > + > > +/** > > + * Reset the I2C bus represented by the given a FDT I2C node. > > + * > > + * @param blob Device tree blbo > > + * @param node FDT I2C node to find > > + * @return 0 if port was reset, -1 if not found > > + */ > > +int i2c_reset_port_fdt(const void *blob, int node); > > #endif /* _I2C_H_ */ > > > > -- > Thanks, > Minkyu Kang. > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > -- Regards, Rajeshwari Shinde
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot