Is it possible to add my kernel to the rootfs partition rather than have a separate partition?
I am using U-Boot 1.3.4, on a at91sam9g20ek (256Mb Nand, 8Mb Nor), and use the sam-ba firmware upload tool. I'd like to put everything on nand, ignore nor, and hold redundant areas, in perpetration for firmware updates. My starting point is from the atmel Linux4SAM project: Nor layout: Logical address: 0xD0000000 size Address-Range 16895 Area 0: D0000000 to D00041FF (RO) Bootstrap 16895 Area 1: D0004200 to D00083FF Environment 236543 Area 2: D0008400 to D0041FFF (RO) U-Boot 2152687 Area 3: D0042000 to D0251FFF Kernel 6217727 Area 4: D0252000 to D083FFFF FS Nand layout: 4194304: 0x000000000000-0x000000400000 : "bootstrap/uboot/kernel" 62914560 0x000000400000-0x000004000000 : "rootfs" 201226592 0x000004000000-0x000010000000 : "data" bootargs: mem=64M console=ttyS0,115200 mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,60M(rootfs),-(data) root=/dev/mtdblock1 rw rootfstype=jffs2 bootcmd: cp.b 0xD0042000 0x22200000 0x0019306C; bootm 0x22200000 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
