Dear Scott Wood, > On 01/07/2013 07:47:12 AM, Marek Vasut wrote: > > Dear Benoît Thébaudeau, > > > > > Dear Marek Vasut, > > > > > > On Monday, January 7, 2013 2:02:47 PM, Marek Vasut wrote: > > > > Dear Benoît Thébaudeau, > > > > > > > > > Hi all, > > > > > > > > > > This series aims at adding support for i.MX5 to the mxc nand mtd > > > > > and spl > > > > > drivers. It also fixes several issues and cleans up the code a > > > > > little bit. > > > > > > > > > > Best regards, > > > > > Benoît > > > > > > > > Did this patchset advance any further? Any chance we can see this > > > > applied? > > > > Anything I can help with to make it applied? > > > > > > Only 13/13 has not yet been applied. I still have to add NFC > > > > support to one > > > > > i.MX5 board for the patch to be accepted. Fabio has confirmed that > > > > mx53ard > > > > > would be fine. > > > > Sigh ... I have board with NAND pending, so Scott, please apply. > > Can you repost it as part of a patchset with that board, and I'll ack > so they can go together?
I found an issue with the patch, so will do. > Does this board do NAND boot? No, boots from other means. > If so, new-SPL rather than nand_spl > would be nice. Tom's comment at the time was, "I'm OK with pulling > this in while providing an on-the-record prod to please find some time > to do a conversion or two in time for v2013.01." If this patch is > applied now, it would be for the release after v2013.01... No prob. > -Scott Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
