2013/1/8 Gabor Juhos <[email protected]>: > Using the example command from the README file does > not work as expected. qemu shows a text similar to > the one below and it hangs. > > $ qemu-system-mips -L . -nographic > Could not open option rom 'pxe-pcnet.rom': No such file or directory > qemu-system-mips: pci_add_option_rom: failed to find romfile > "vgabios-cirrus.bin" > qemu: terminating on signal 15 from pid 19726 > > This happens because qemu emulates a Malta board by > default if the machine type is not defined explicitely > on the command line. > > For a working test, the '-M mips' switch is required: > > $ qemu-system-mips -M mips -L . -nographic > Could not open option rom 'vgabios.bin': No such file or directory > > U-Boot 2013.01-rc2-00132-g1e8e648-dirty (Jan 08 2013 - 09:06:42) > > Board: Qemu -M mips CPU: 24Kf proc_id=0x19300 > DRAM: 128 MiB > ## Unknown flash on Bank 1 - Size = 0x00000000 = 0 MB > Flash: 0 Bytes > *** Warning - bad CRC, using default environment > > In: serial > Out: serial > Err: serial > Net: NE2000 > Hit any key to stop autoboot: 0 > qemu-mips # > > Signed-off-by: Gabor Juhos <[email protected]> > Cc: Daniel Schwierzeck <[email protected]> > Cc: Vlad Lungu <[email protected]> > --- > board/qemu-mips/README | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-)
applied to u-boot-mips/next, thanks -- Best regards, Daniel _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
