On 01/18/2013 02:12 PM, Tom Warren wrote: > This provides SPL support for T114 boards - AVP early init, plus > CPU (A15) init/jump to main U-Boot.
> +void powerup_cpus(void) > +{ > + debug("powerup_cpus entry\n"); > + > + /* Are we booting to the fast cluster? */ > + if (get_cluster_id() == 0) { > + debug("powerup_cpus entry: G cluster\n"); > + /* Power up the fast cluster rail partition */ > + power_partition(CRAIL, CRAILID); > + > + /* Power up the fast cluster non-CPU partition */ > + power_partition(C0NC, C0NCID); > + > + /* Power up the fast cluster CPU0 partition */ > + power_partition(CE0, CE0ID); > + } else { > + debug("powerup_cpus entry: LP cluster\n"); > + /* Power up the slow cluster non-CPU partition */ > + power_partition(C1NC, C1NCID); > + > + /* Power up the slow cluster CPU partition */ > + power_partition(CELP, CELPID); > + } > +} I strongly believe we should determine why that is needed rather than blindly upstreaming it. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot