Dear Mats, In message <[email protected]> you wrote: > > Question: To help me decide where to look I would like to know if anyone has > built the mpc5121ads board configuration using U-Boot 2013.01 and actually > tested that it is still working?
Yes, v2012.01 is working on the MPC5121ADS board: U-Boot 2013.01 (Jan 23 2013 - 21:37:51)MPC512X CPU: MPC5121e rev. 2.0, Core e300c4 at 400 MHz, CSB at 200 MHz (RSR=0x1003) Board: MPC5121ADS rev. 0x0400 (CPLD rev. 0x05) I2C: ready DRAM: 512 MiB Flash: 64 MiB NAND: 1024 MiB PCI: Bus Dev VenId DevId Class Int In: serial Out: serial Err: serial Net: FEC IDE: Bus 0: ............................................................** Timeout ** Type run flash_nfs to mount root filesystem over NFS Hit any key to stop autoboot: 0 => Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] In any group of employed individuals the only naturally early riser is _always_ the office manager, who will _always_ leave reproachful little notes ... on the desks of their subordinates. - Terry Pratchett, _Lords and Ladies_ _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
