Dear Otavio Salvador,
> The i.MX23 just one USB port so disable the second controller probe
> when building for i.MX23.
>
> Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
> ---
> drivers/usb/host/ehci-mxs.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/usb/host/ehci-mxs.c b/drivers/usb/host/ehci-mxs.c
> index 5062af5..28c8cde 100644
> --- a/drivers/usb/host/ehci-mxs.c
> +++ b/drivers/usb/host/ehci-mxs.c
> @@ -50,10 +50,12 @@ int mxs_ehci_get_port(struct ehci_mxs *mxs_usb, int
> port) usb_base = MXS_USBCTRL0_BASE;
> phy_base = MXS_USBPHY0_BASE;
> break;
> +#ifdef CONFIG_MX28
> case 1:
> usb_base = MXS_USBCTRL1_BASE;
> phy_base = MXS_USBPHY1_BASE;
> break;
> +#endif
> default:
> printf("CONFIG_EHCI_MXS_PORT (port = %d)\n", port);
> return -1;
This is not enough.
For example this portion will do something undefined on mx23:
98 writel(HW_DIGCTL_CTRL_USB0_CLKGATE | HW_DIGCTL_CTRL_USB1_CLKGATE,
99 &digctl_ctrl->reg_clr);
THis ehci-mxs.c needs full review for mx23.
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
