Hello Wolfgang, Sebastian, On 01.02.2013 12:31, Wolfgang Denk wrote: > In message > <E70AF999396FDF4EAE40E195B847096109F5D3A9@SRVEXCH-2K10.CADCON.INTERN> you > wrote: >> >> we are using u-boot in our embedded system with arm-1136jfs cpu. > > Which exact system / board configuration is this? > > And which exact U-Boot version (git commit ID ?) is it? > >> We recently tried a new toolchain with GCC 4.7.2. >> If compiled with the new toolchain the feature CONFIG_AUTO_COMPLETE isn't >> working. > > We have been using GCC 4.7.2 for several months now, on many systems. > No such problems have been reported before, so I speculate if this is > really a problem with mainline code?
Sebastian wrote On 01.02.2013 08:55: > we are using u-boot in our embedded system with arm-1136jfs cpu. > We recently tried a new toolchain with GCC 4.7.2. > If compiled with the new toolchain the feature CONFIG_AUTO_COMPLETE isn't > working. > U-Boot start normally and on hitting TAB the system freezes. > I tracked the problem down the variables __u_boot_cmd_start and > __u_boot_cmd_end. Both are not valid with the new toolchain. And accessing > one results in a system freeze. > Probably the is a problem in arch/arm/cpu/u-boot.lds. I really bad at linker > scripts. I just see some problems with ll_entry_* functions described in my post here: http://lists.denx.de/pipermail/u-boot/2013-February/145711.html I do not know, if this is the same problem, as I face problems only before relocation, after relocation all works fine ... In this thread Marek wrote, that for this problem albert has a solution ... (CCed albert and marek) Albert? Can you help here? bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
