Hello Wolfgang,
On 02/04/2013 09:35 PM, Wolfgang Denk wrote:
Dear Nikita Kiryanov,
In message <[email protected]> you wrote:
I did mention that I consider that fix as temporary. I believe this fix
is better because it addresses the issue everywhere and does so in a
more maintainable way (does not require the address fix to be duplicated
everywhere there is a problem).
Can you please explain (again) what exactly you consider the problem?
That I can load a BMP image to anodd address, and that this will
result in odd results?
If you use eldk 5.3, a board will be bricked if you set the load address
to not (an aligned address _+ 2_). So anyone who didn't know the +2
requirement, has a bricked board (and can't recover). So this is
really a different then md trapping, since resetting the board won't
help... it is broken / kaput.
That said, I am not really in favor of this solution. But I do think it
needs
to be fixed.
Regards,
Jeroen
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
