This moves out the Tegra EHCI driver from a platform specific directory to the standard driver/usb/host dir.
This is a preparation needed to share this driver between Tegra20 and Tegra30. No functional change in here, so Tegra30 is still not working. Patch 6 could be a lot smaller if it were generated with -B, as GIT would detect that most of it is moving stuff over, but last time I did this it prevented git apply to work. So sorry for the big diff. I think I incorporated all changes needed to reflect the review feedback I got on this last time. V3 is rebased onto u-boot-tegra/next, fixes a build warning and has Simons acked-by attached to the patches. I expect this series to go in through the Tegra tree. Marek, I suppose you are OK with the series, as you already were about to apply them in V2 form, please ACK so Tom can pick them up. Lucas Stach (7): tegra: usb: set USB_PORTS_MAX to correct value tegra: usb: make controller init functions more self contained tegra: usb: remove unneeded function parameter tegra: usb: move controller init into start_port tegra: usb: various small cleanups tegra: usb: move implementation into right directory tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop] arch/arm/cpu/armv7/tegra20/Makefile | 1 - arch/arm/cpu/armv7/tegra20/usb.c | 567 ------------------------------ arch/arm/include/asm/arch-tegra/usb.h | 249 +++++++++++++ arch/arm/include/asm/arch-tegra20/tegra.h | 1 - arch/arm/include/asm/arch-tegra20/usb.h | 271 -------------- arch/arm/include/asm/arch-tegra30/tegra.h | 2 + board/nvidia/common/board.c | 2 +- drivers/usb/host/ehci-tegra.c | 546 +++++++++++++++++++++++++++- 8 files changed, 782 insertions(+), 857 deletions(-) delete mode 100644 arch/arm/cpu/armv7/tegra20/usb.c create mode 100644 arch/arm/include/asm/arch-tegra/usb.h delete mode 100644 arch/arm/include/asm/arch-tegra20/usb.h -- 1.8.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
