Signed-off-by: Benoît Thébaudeau <[email protected]>
---
Changes in v5:
- Remove spaces between function name and open parenthesis.
- Fix mx31pdk and tx25 Makefile-s and SPL linker scripts.
- Remove the useless definition of CONFIG_SPL_LDSCRIPT.
- Fix the call to nand_boot().
Changes in v4:
- New patch.
Changes in v3: None
Changes in v2: None
Makefile | 3 +
arch/arm/cpu/arm1136/config.mk | 3 -
arch/arm/cpu/arm1136/start.S | 2 -
arch/arm/cpu/arm926ejs/start.S | 9 +-
board/freescale/mx31pdk/Makefile | 4 +
board/freescale/mx31pdk/config.mk | 5 --
.../freescale/mx31pdk/u-boot-spl.lds | 20 +++--
board/karo/tx25/Makefile | 5 +-
board/karo/tx25/config.mk | 5 --
.../u-boot.lds => board/karo/tx25/u-boot-spl.lds | 16 ++--
boards.cfg | 2 +-
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/mxc_nand.c | 10 +--
include/fsl_nfc.h => drivers/mtd/nand/mxc_nand.h | 10 +--
.../mtd/nand/mxc_nand_spl.c | 26 +++---
include/common.h | 6 +-
include/configs/mx31pdk.h | 10 ++-
include/configs/tx25.h | 13 ++-
include/configs/woodburn_sd.h | 1 +
nand_spl/board/freescale/mx31pdk/Makefile | 68 ---------------
nand_spl/board/karo/tx25/Makefile | 89 --------------------
nand_spl/board/karo/tx25/config.mk | 1 -
22 files changed, 87 insertions(+), 222 deletions(-)
delete mode 100644 board/freescale/mx31pdk/config.mk
rename nand_spl/board/karo/tx25/u-boot.lds =>
board/freescale/mx31pdk/u-boot-spl.lds (86%)
delete mode 100644 board/karo/tx25/config.mk
rename nand_spl/board/freescale/mx31pdk/u-boot.lds =>
board/karo/tx25/u-boot-spl.lds (89%)
rename include/fsl_nfc.h => drivers/mtd/nand/mxc_nand.h (98%)
rename nand_spl/nand_boot_fsl_nfc.c => drivers/mtd/nand/mxc_nand_spl.c (92%)
delete mode 100644 nand_spl/board/freescale/mx31pdk/Makefile
delete mode 100644 nand_spl/board/karo/tx25/Makefile
delete mode 100644 nand_spl/board/karo/tx25/config.mk
diff --git a/Makefile b/Makefile
index d28e608..cc2298a 100644
--- a/Makefile
+++ b/Makefile
@@ -470,6 +470,9 @@ $(obj)u-boot.img: $(obj)u-boot.bin
$(OBJTREE)/u-boot.imx : $(obj)u-boot.bin $(SUBDIR_TOOLS) depend
$(MAKE) -C $(SRCTREE)/arch/arm/imx-common $@
+$(OBJTREE)/SPL : $(obj)spl/u-boot-spl.bin depend
+ $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $@
+
$(obj)u-boot.kwb: $(obj)u-boot.bin
$(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
diff --git a/arch/arm/cpu/arm1136/config.mk b/arch/arm/cpu/arm1136/config.mk
index 9092d91..efee0d1 100644
--- a/arch/arm/cpu/arm1136/config.mk
+++ b/arch/arm/cpu/arm1136/config.mk
@@ -31,6 +31,3 @@ PLATFORM_CPPFLAGS += -march=armv5
# =========================================================================
PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call
cc-option,-malignment-traps,))
PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT)
-ifdef CONFIG_SPL_BUILD
-ALL-y += $(OBJTREE)/SPL
-endif
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index a067b8a..3818768 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -235,8 +235,6 @@ fixnext:
add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
blo fixloop
- bx lr
-
#endif
relocate_done:
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 66a8b65..dee45f7 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -140,6 +140,10 @@ _TEXT_BASE:
_bss_start_ofs:
.word __bss_start - _start
+.global _image_copy_end_ofs
+_image_copy_end_ofs:
+ .word __image_copy_end - _start
+
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end__ - _start
@@ -196,7 +200,6 @@ reset:
/*------------------------------------------------------------------------------*/
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_NAND_SPL)
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
@@ -216,7 +219,7 @@ relocate_code:
moveq r9, #0 /* no relocation. offset(r9) = 0 */
beq relocate_done /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy loop */
- ldr r3, _bss_start_ofs
+ ldr r3, _image_copy_end_ofs
add r2, r0, r3 /* r2 <- source end address */
copy_loop:
@@ -270,6 +273,8 @@ relocate_done:
bx lr
+#ifndef CONFIG_SPL_BUILD
+
_rel_dyn_start_ofs:
.word __rel_dyn_start - _start
_rel_dyn_end_ofs:
diff --git a/board/freescale/mx31pdk/Makefile b/board/freescale/mx31pdk/Makefile
index 5b7cafd..a1e01f0 100644
--- a/board/freescale/mx31pdk/Makefile
+++ b/board/freescale/mx31pdk/Makefile
@@ -27,7 +27,11 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
+ifdef CONFIG_SPL_BUILD
+SOBJS := lowlevel_init.o
+else
COBJS := mx31pdk.o
+endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/mx31pdk/config.mk
b/board/freescale/mx31pdk/config.mk
deleted file mode 100644
index de2c642..0000000
--- a/board/freescale/mx31pdk/config.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-ifdef CONFIG_NAND_SPL
-CONFIG_SYS_TEXT_BASE = 0x87ec0000
-else
-CONFIG_SYS_TEXT_BASE = 0x87f00000
-endif
diff --git a/nand_spl/board/karo/tx25/u-boot.lds
b/board/freescale/mx31pdk/u-boot-spl.lds
similarity index 86%
rename from nand_spl/board/karo/tx25/u-boot.lds
rename to board/freescale/mx31pdk/u-boot-spl.lds
index ee36131..96e04ce 100644
--- a/nand_spl/board/karo/tx25/u-boot.lds
+++ b/board/freescale/mx31pdk/u-boot-spl.lds
@@ -30,30 +30,32 @@ SECTIONS
. = ALIGN(4);
.text :
{
- start.o (.text)
- lowlevel_init.o (.text)
- nand_boot_fsl_nfc.o (.text)
- *(.text)
+ arch/arm/cpu/arm1136/start.o (.text*)
+ board/freescale/mx31pdk/libmx31pdk.o (.text*)
+ drivers/mtd/nand/libnand.o (.text*)
+ *(.text*)
. = 2K;
}
. = ALIGN(4);
- .rodata : { *(.rodata) }
+ .rodata : { *(.rodata*) }
. = ALIGN(4);
.data : {
- *(.data)
+ *(.data*)
}
. = ALIGN(4);
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ #include <u-boot.lst>
}
. = ALIGN(4);
+ __image_copy_end = .;
+
.rel.dyn : {
__rel_dyn_start = .;
*(.rel*)
@@ -62,14 +64,14 @@ SECTIONS
.dynsym : {
__dynsym_start = .;
- *(.dynsym)
+ *(.dynsym*)
}
_end = .;
.bss __rel_dyn_start (OVERLAY) : {
__bss_start = .;
- *(.bss)
+ *(.bss*)
. = ALIGN(4);
__bss_end__ = .;
}
diff --git a/board/karo/tx25/Makefile b/board/karo/tx25/Makefile
index 9617fa5..cf83a6b 100644
--- a/board/karo/tx25/Makefile
+++ b/board/karo/tx25/Makefile
@@ -25,8 +25,11 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS := tx25.o
+ifdef CONFIG_SPL_BUILD
SOBJS := lowlevel_init.o
+else
+COBJS := tx25.o
+endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/karo/tx25/config.mk b/board/karo/tx25/config.mk
deleted file mode 100644
index 18b2883..0000000
--- a/board/karo/tx25/config.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-ifdef CONFIG_NAND_SPL
-CONFIG_SYS_TEXT_BASE = 0x810c0000
-else
-CONFIG_SYS_TEXT_BASE = 0x81200000
-endif
diff --git a/nand_spl/board/freescale/mx31pdk/u-boot.lds
b/board/karo/tx25/u-boot-spl.lds
similarity index 89%
rename from nand_spl/board/freescale/mx31pdk/u-boot.lds
rename to board/karo/tx25/u-boot-spl.lds
index a26110f..0d7f140 100644
--- a/nand_spl/board/freescale/mx31pdk/u-boot.lds
+++ b/board/karo/tx25/u-boot-spl.lds
@@ -30,19 +30,19 @@ SECTIONS
. = ALIGN(4);
.text :
{
- start.o (.text)
- lowlevel_init.o (.text)
- nand_boot_fsl_nfc.o (.text)
- *(.text)
+ arch/arm/cpu/arm926ejs/start.o (.text*)
+ board/karo/tx25/libtx25.o (.text*)
+ drivers/mtd/nand/libnand.o (.text*)
+ *(.text*)
. = 2K;
}
. = ALIGN(4);
- .rodata : { *(.rodata) }
+ .rodata : { *(.rodata*) }
. = ALIGN(4);
.data : {
- *(.data)
+ *(.data*)
}
. = ALIGN(4);
@@ -64,14 +64,14 @@ SECTIONS
.dynsym : {
__dynsym_start = .;
- *(.dynsym)
+ *(.dynsym*)
}
_end = .;
.bss __rel_dyn_start (OVERLAY) : {
__bss_start = .;
- *(.bss)
+ *(.bss*)
. = ALIGN(4);
__bss_end__ = .;
}
diff --git a/boards.cfg b/boards.cfg
index 7d03620..2649c88 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -45,7 +45,7 @@ imx31_phycore arm arm1136 -
-
imx31_phycore_eet arm arm1136 imx31_phycore -
mx31 imx31_phycore:IMX31_PHYCORE_EET
qong arm arm1136 -
davedenx mx31
mx31ads arm arm1136 -
freescale mx31
-mx31pdk arm arm1136 -
freescale mx31 mx31pdk:NAND_U_BOOT
+mx31pdk arm arm1136 -
freescale mx31
tt01 arm arm1136 - hale
mx31
imx31_litekit arm arm1136 -
logicpd mx31
flea3 arm arm1136 -
CarMediaLab mx35
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index c77c0c4..bcb7161 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -82,6 +82,7 @@ COBJS-$(CONFIG_NAND_PLAT) += nand_plat.o
else # minimal SPL drivers
COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o
+COBJS-$(CONFIG_NAND_MXC) += mxc_nand_spl.o
endif # drivers
endif # nand
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 001c2c0..159e3b4 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -26,7 +26,7 @@
defined(CONFIG_MX51) || defined(CONFIG_MX53)
#include <asm/arch/imx-regs.h>
#endif
-#include <fsl_nfc.h>
+#include "mxc_nand.h"
#define DRIVER_NAME "mxc_nand"
@@ -36,9 +36,9 @@ struct mxc_nand_host {
struct mtd_info mtd;
struct nand_chip *nand;
- struct fsl_nfc_regs __iomem *regs;
+ struct mxc_nand_regs __iomem *regs;
#ifdef MXC_NFC_V3_2
- struct fsl_nfc_ip_regs __iomem *ip_regs;
+ struct mxc_nand_ip_regs __iomem *ip_regs;
#endif
int spare_only;
int status_request;
@@ -1254,10 +1254,10 @@ int board_nand_init(struct nand_chip *this)
this->read_buf = mxc_nand_read_buf;
this->verify_buf = mxc_nand_verify_buf;
- host->regs = (struct fsl_nfc_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
+ host->regs = (struct mxc_nand_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
#ifdef MXC_NFC_V3_2
host->ip_regs =
- (struct fsl_nfc_ip_regs __iomem *)CONFIG_MXC_NAND_IP_REGS_BASE;
+ (struct mxc_nand_ip_regs __iomem *)CONFIG_MXC_NAND_IP_REGS_BASE;
#endif
host->clk_act = 1;
diff --git a/include/fsl_nfc.h b/drivers/mtd/nand/mxc_nand.h
similarity index 98%
rename from include/fsl_nfc.h
rename to drivers/mtd/nand/mxc_nand.h
index 48a6448..308ff8d 100644
--- a/include/fsl_nfc.h
+++ b/drivers/mtd/nand/mxc_nand.h
@@ -20,8 +20,8 @@
* MA 02111-1307 USA
*/
-#ifndef __FSL_NFC_H
-#define __FSL_NFC_H
+#ifndef __MXC_NAND_H
+#define __MXC_NAND_H
/*
* Register map and bit definitions for the Freescale NAND Flash Controller
@@ -73,7 +73,7 @@
#define NAND_MXC_REG_OFFSET 0x1e00
#endif
-struct fsl_nfc_regs {
+struct mxc_nand_regs {
u8 main_area[NAND_MXC_NR_BUFS][0x200];
u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
/*
@@ -131,7 +131,7 @@ struct fsl_nfc_regs {
};
#ifdef MXC_NFC_V3_2
-struct fsl_nfc_ip_regs {
+struct mxc_nand_ip_regs {
u32 wrprot;
u32 wrprot_unlock_blkaddr[8];
u32 config2;
@@ -222,4 +222,4 @@ struct fsl_nfc_ip_regs {
#define writenfc writel
#endif
-#endif /* __FSL_NFC_H */
+#endif /* __MXC_NAND_H */
diff --git a/nand_spl/nand_boot_fsl_nfc.c b/drivers/mtd/nand/mxc_nand_spl.c
similarity index 92%
rename from nand_spl/nand_boot_fsl_nfc.c
rename to drivers/mtd/nand/mxc_nand_spl.c
index 1096727..5f7108d 100644
--- a/nand_spl/nand_boot_fsl_nfc.c
+++ b/drivers/mtd/nand/mxc_nand_spl.c
@@ -28,13 +28,13 @@
#include <nand.h>
#include <asm/arch/imx-regs.h>
#include <asm/io.h>
-#include <fsl_nfc.h>
+#include "mxc_nand.h"
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
-static struct fsl_nfc_regs *const nfc = (void *)NFC_BASE_ADDR;
+static struct mxc_nand_regs *const nfc = (void *)NFC_BASE_ADDR;
#elif defined(MXC_NFC_V3_2)
-static struct fsl_nfc_regs *const nfc = (void *)NFC_BASE_ADDR_AXI;
-static struct fsl_nfc_ip_regs *const nfc_ip = (void *)NFC_BASE_ADDR;
+static struct mxc_nand_regs *const nfc = (void *)NFC_BASE_ADDR_AXI;
+static struct mxc_nand_ip_regs *const nfc_ip = (void *)NFC_BASE_ADDR;
#endif
static void nfc_wait_ready(void)
@@ -68,7 +68,7 @@ static void nfc_nand_init(void)
tmp = (readnfc(&nfc_ip->config2) & ~(NFC_V3_CONFIG2_SPAS_MASK |
NFC_V3_CONFIG2_EDC_MASK | NFC_V3_CONFIG2_PS_MASK)) |
- NFC_V3_CONFIG2_SPAS(CONFIG_SYS_NAND_SPARE_SIZE / 2) |
+ NFC_V3_CONFIG2_SPAS(CONFIG_SYS_NAND_OOBSIZE / 2) |
NFC_V3_CONFIG2_INT_MSK | NFC_V3_CONFIG2_ECC_EN |
NFC_V3_CONFIG2_ONE_CYCLE;
if (CONFIG_SYS_NAND_PAGE_SIZE == 4096)
@@ -81,7 +81,7 @@ static void nfc_nand_init(void)
* if spare size is larger that 16 bytes per 512 byte hunk
* then use 8 symbol correction instead of 4
*/
- if (CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16)
+ if (CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16)
tmp |= NFC_V3_CONFIG2_ECC_MODE_8;
else
tmp &= ~NFC_V3_CONFIG2_ECC_MODE_8;
@@ -102,7 +102,7 @@ static void nfc_nand_init(void)
int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
int config1;
- writenfc(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size);
+ writenfc(CONFIG_SYS_NAND_OOBSIZE / 2, &nfc->spare_area_size);
/* unlocking RAM Buff */
writenfc(0x2, &nfc->config);
@@ -115,7 +115,7 @@ static void nfc_nand_init(void)
* if spare size is larger that 16 bytes per 512 byte hunk
* then use 8 symbol correction instead of 4
*/
- if (CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16)
+ if (CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16)
config1 &= ~NFC_V2_CONFIG1_ECC_MODE_4;
else
config1 |= NFC_V2_CONFIG1_ECC_MODE_4;
@@ -204,7 +204,7 @@ static int nfc_nand_check_ecc(void)
#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
u32 ecc_status = readl(&nfc->ecc_status_result);
int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
- int err_limit = CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16 ? 8 : 4;
+ int err_limit = CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16 ? 8 : 4;
int subpages = CONFIG_SYS_NAND_PAGE_SIZE / 512;
do {
@@ -333,10 +333,12 @@ static int nand_load(unsigned int from, unsigned int
size, unsigned char *buf)
}
#if defined(CONFIG_ARM)
-void board_init_f (ulong bootflag)
+void board_init_f(ulong bootflag)
{
- relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL,
- CONFIG_SYS_TEXT_BASE);
+ relocate_code(CONFIG_SPL_TEXT_BASE - TOTAL_MALLOC_LEN, NULL,
+ CONFIG_SPL_TEXT_BASE);
+
+ asm volatile("ldr pc, =nand_boot\n");
}
#endif
diff --git a/include/common.h b/include/common.h
index 4ad17ea..43a5ee4 100644
--- a/include/common.h
+++ b/include/common.h
@@ -515,7 +515,11 @@ int dcache_status (void);
void dcache_enable (void);
void dcache_disable(void);
void mmu_disable(void);
-void relocate_code (ulong, gd_t *, ulong) __attribute__ ((noreturn));
+void relocate_code (ulong, gd_t *, ulong)
+#if !defined(CONFIG_ARM)
+__attribute__ ((noreturn))
+#endif
+;
ulong get_endaddr (void);
void trap_init (ulong);
#if defined (CONFIG_4xx) || \
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 34e4295..8892e89 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -45,7 +45,15 @@
#define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_SPL
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+#define CONFIG_SPL_MAX_SIZE 2048
+#define CONFIG_SPL_NAND_SUPPORT
+
+#define CONFIG_SPL_TEXT_BASE 0x87ec0000
+#define CONFIG_SYS_TEXT_BASE 0x87f00000
+
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index 80194d8..e362fe9 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -31,8 +31,13 @@
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for
U-Boot */
-/* NAND BOOT is the only boot method */
-#define CONFIG_NAND_U_BOOT
+#define CONFIG_SPL
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+#define CONFIG_SPL_MAX_SIZE 2048
+#define CONFIG_SPL_NAND_SUPPORT
+
+#define CONFIG_SPL_TEXT_BASE 0x810c0000
+#define CONFIG_SYS_TEXT_BASE 0x81200000
#ifndef MACH_TYPE_TX25
#define MACH_TYPE_TX25 2177
@@ -40,7 +45,7 @@
#define CONFIG_MACH_TYPE MACH_TYPE_TX25
-#ifdef CONFIG_NAND_SPL
+#ifdef CONFIG_SPL_BUILD
/* Start copying real U-boot from the second page */
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x30000
@@ -49,7 +54,7 @@
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
-#define CONFIG_SYS_NAND_SPARE_SIZE 64
+#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_SIZE (128 * 1024 * 1024)
diff --git a/include/configs/woodburn_sd.h b/include/configs/woodburn_sd.h
index 63185c5..1cc0e95 100644
--- a/include/configs/woodburn_sd.h
+++ b/include/configs/woodburn_sd.h
@@ -38,6 +38,7 @@
#define CONFIG_SPL
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm1136/u-boot-spl.lds"
+#define CONFIG_SPL_TARGET "SPL"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
diff --git a/nand_spl/board/freescale/mx31pdk/Makefile
b/nand_spl/board/freescale/mx31pdk/Makefile
deleted file mode 100644
index fd0dfc1..0000000
--- a/nand_spl/board/freescale/mx31pdk/Makefile
+++ /dev/null
@@ -1,68 +0,0 @@
-CONFIG_NAND_SPL = y
-PAD_TO := 2048
-
-include $(TOPDIR)/config.mk
-
-nandobj := $(OBJTREE)/nand_spl/
-
-LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
-LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \
- $(LDFLAGS_FINAL)
-AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
-CFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
-
-SOBJS = start.o crt0.o lowlevel_init.o
-COBJS = nand_boot_fsl_nfc.o
-
-SRCS := $(SRCTREE)/nand_spl/nand_boot_fsl_nfc.c
-SRCS += $(SRCTREE)/arch/arm/cpu/arm1136/start.S
-SRCS += $(SRCTREE)/arch/arm/lib/crt0.S
-SRCS += $(SRCTREE)/board/freescale/mx31pdk/lowlevel_init.S
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-__OBJS := $(SOBJS) $(COBJS)
-LNDIR := $(nandobj)board/$(BOARDDIR)
-
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin
$(nandobj)u-boot-spl-16k.bin
-
-all: $(obj).depend $(ALL)
-
-$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
- $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
-
-$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
- $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds
- cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $@
-
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
- -ansi -D__ASSEMBLY__ -P - <$< >$@
-
-#########################################################################
-
-$(obj)%.o: $(SRCTREE)/arch/arm/cpu/arm1136/%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(SRCTREE)/arch/arm/lib/%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(SRCTREE)/board/freescale/mx31pdk/%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(SRCTREE)/nand_spl/%.c
- $(CC) $(CFLAGS) -c -o $@ $<
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/nand_spl/board/karo/tx25/Makefile
b/nand_spl/board/karo/tx25/Makefile
deleted file mode 100644
index 82489d2..0000000
--- a/nand_spl/board/karo/tx25/Makefile
+++ /dev/null
@@ -1,89 +0,0 @@
-#
-# (C) Copyright 2009 DENX Software Engineering
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundatio; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-CONFIG_NAND_SPL = y
-
-include $(TOPDIR)/config.mk
-include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
-
-nandobj := $(OBJTREE)/nand_spl/
-
-LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
-LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \
- $(LDFLAGS_FINAL)
-AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
-CFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
-
-SOBJS = start.o crt0.o lowlevel_init.o
-COBJS = nand_boot_fsl_nfc.o
-
-SRCS := $(SRCTREE)/nand_spl/nand_boot_fsl_nfc.c
-SRCS += $(SRCTREE)/arch/arm/cpu/arm926ejs/start.S
-SRCS += $(SRCTREE)/arch/arm/lib/crt0.S
-SRCS += $(SRCTREE)/board/karo/tx25/lowlevel_init.S
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-__OBJS := $(SOBJS) $(COBJS)
-LNDIR := $(nandobj)board/$(BOARDDIR)
-
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin
$(nandobj)u-boot-spl-16k.bin
-
-all: $(obj).depend $(ALL)
-
-$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
- $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
-
-$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
- $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds
- cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $@
-
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
- -ansi -D__ASSEMBLY__ -P - <$< >$@
-
-#########################################################################
-
-$(obj)%.o: $(SRCTREE)/arch/arm/cpu/arm926ejs/%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(SRCTREE)/arch/arm/lib/%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(SRCTREE)/board/karo/tx25/%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(SRCTREE)/nand_spl/%.c
- $(CC) $(CFLAGS) -c -o $@ $<
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/nand_spl/board/karo/tx25/config.mk
b/nand_spl/board/karo/tx25/config.mk
deleted file mode 100644
index 68afbf1..0000000
--- a/nand_spl/board/karo/tx25/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-PAD_TO := 2048
--
1.7.10.4
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
