Hi Fabio, On Friday, February 22, 2013 10:26:47 PM, Fabio Estevam wrote: > On Fri, Feb 22, 2013 at 6:13 PM, Benoît Thébaudeau > <benoit.thebaud...@advansee.com> wrote: > > > CONFIG_SYS_TEXT_BASE seems fine according to this trace. But anyway, can > > you > > test with this change in mx31pdk.h? > > #define CONFIG_SPL_TEXT_BASE 0x84000000 > > #define CONFIG_SYS_TEXT_BASE 0x83000000 > > > > Can you try to revert 10/19, only for arm1136/start.S (1 line to restore)? > > There > > is an issue in this patch that I have already fixed in my v8. > > Just tried with the above changes: > > U-Boot code: 83000000 -> 8302C184 BSS: -> 830311B4 > CPU: Freescale i.MX31 rev 2.0 at 532 MHz. > Reset cause: POR > Board: MX31PDK > monitor len: 000311B4 > ramsize: 08000000 > TLB table from 87ff0000 to 87ff4000 > Top of RAM usable for U-Boot at: 87ff0000 > Reserving 196k for U-Boot at: 87fbe000 > Reserving 640k for malloc() at: 87f1e000 > Reserving 32 Bytes for Board Info at: 87f1dfe0 > Reserving 128 Bytes for Global Data at: 87f1df60 > New Stack Pointer is: 87f1df50 > RAM Configuration: > Bank #0: 80000000 128 MiB > relocation Offset is: 04fbe000
I have no other clue for now. Can you try asm step by step in relocate_code()? :( Best regards, Benoît _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
