Dear Lukasz Majewski, > Hi Marek, > > > Dear Lukasz Majewski, > > > > > This commit fixes problems with some non-standard requests send with > > > device address instead of interface address (bmRequestType.Receipent > > > field). > > > > > > This happens with dfu-util (debian version: 0.5), which address non > > > standard requests (like w_value=0x21 and bRequest=GET_DESCRIPTOR) to > > > device. Without this fix, the above request is STALLED, and hence > > > causes dfu-util to assume some standard configuration (packet size > > > = 1024B instead of 4096B) In turn it displays following errors: > > > Error obtaining DFU functional descriptor > > > Warning: Assuming DFU version 1.0 > > > Warning: Transfer size can not be detected > > > ... > > > Warning: Trying default transfer size 1024 > > > > > > This fix allows passing non-standard request to function setup > > > code, where it shall be handled. > > > > > > Tested at: Trats (exynos4210) > > > Tested with:DFU and UMS gadgets > > > > Can you please repost all the patches you want applied on > > u-boot-usb ? I'm completely lost in all this DFU stuff. > > This is only one patch to replace patch done by Pantelis: > > Patch to replace (revert): > dfu: Send correct DFU response from composite_setup > SHA1: fef31049fa06e516945114195eb14ac3549d0ad2 > > And this shall be replaced with posted patch. > > Another patches (with UMS gadget support - done by Piotr Wilczek), also > shall be added to u-boot-usb tree: > > http://patchwork.ozlabs.org/patch/219744/ > http://patchwork.ozlabs.org/patch/219746/ > http://patchwork.ozlabs.org/patch/219745/
Ok, please check the u-boot-usb ... if it's OK, I will send Tom a pullrq (finally). Tom, do you still accept those for .04 ? Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
