From: Fabio Estevam <fabio.este...@freescale.com> When loading a Freescale 2.6.35 on a mx28evk the following issue is seen:
sgtl5000_hw_read: read reg error : Reg 0x00 Device with ID register 0 is not a SGTL5000 Disabling CONFIG_CMD_I2C makes the sgtl5000 probe to succeed. Mainline kernel does not show this problem. Until the real cause is not identified, disable 'CONFIG_CMD_I2C' for the time being. Signed-off-by: Fabio Estevam <fabio.este...@freescale.com> --- Stefano, Since 2013.04 is approaching I prefer to disable this option until the real cause is identified. This patch applies on top of http://patchwork.ozlabs.org/patch/225950/ include/configs/mx28evk.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 9cc236f..cf93ec8 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -68,7 +68,6 @@ #define CONFIG_CMD_SPI #define CONFIG_CMD_USB #define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_I2C #define CONFIG_CMD_NAND /* -- 1.7.9.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot