Hi Our board reboots after send Wrong Image Format message to the console and hangs. The Linux uImage is correctly placed in the NAND 0X200000. The console input is somehow inhibit. I cannot type anything on it until the board reboots . The board is an AT91SAM9M10 custom board based on the AT91SAM9M10G45-ek development kit. It has only USB, Serial(DBGU), DDR2 and NAND. I have tried to remove the LCD code but the linker says that printk is missing.
Any clue? Thanks -- View this message in context: http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567.html Sent from the U-Boot mailing list archive at Nabble.com. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
