This makes mxc_iomux_set_input() work correctly. Previously, the incorrect offset of IOMUXSW_INPUT_CTL caused mxc_iomux_set_input() to write to the wrong register, possibly resulting in unexpected behaviour.
Signed-off-by: Philip Paeps <[email protected]> --- Changes in v2: - While here, also correct the offset of the last pad control register. This is mostly cosmetic. arch/arm/cpu/arm1136/mx35/iomux.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/cpu/arm1136/mx35/iomux.c b/arch/arm/cpu/arm1136/mx35/iomux.c index a302575..698909e 100644 --- a/arch/arm/cpu/arm1136/mx35/iomux.c +++ b/arch/arm/cpu/arm1136/mx35/iomux.c @@ -34,8 +34,8 @@ enum iomux_reg_addr { IOMUXSW_MUX_CTL = IOMUXC_BASE_ADDR + 4, /* MUX control */ IOMUXSW_MUX_END = IOMUXC_BASE_ADDR + 0x324, /* last MUX control */ IOMUXSW_PAD_CTL = IOMUXC_BASE_ADDR + 0x328, /* Pad control */ - IOMUXSW_PAD_END = IOMUXC_BASE_ADDR + 0x794, /* last Pad control */ - IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR + 0x7AC, /* input select */ + IOMUXSW_PAD_END = IOMUXC_BASE_ADDR + 0x7A4, /* last Pad control */ + IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR + 0x7A8, /* input select */ IOMUXSW_INPUT_END = IOMUXC_BASE_ADDR + 0x9F4, /* last input select */ }; -- 1.7.2.5 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
