On 04/11/2013 02:25:09 AM, Prabhakar Kushwaha wrote:
Linker script is not able find start.o binary. So add its absolute
path in
u-boot-spl.lds. This change is similar to u-boot-nand.lds
common/Makefile: Avoid compiling unnecssary files
fsl_ifc_spl.c : It is is responsible for reading u-boot binary from
NAND flash and copying into DDR. It also transfer cotrol from NAND SPL
to u-boot image present in DDR.
Signed-off-by: Prabhakar Kushwaha <[email protected]>
---
Based upon git://git.denx.de/u-boot.git branch master
Changes for v2: Sending as it is
Changes for v3: Fix tools/checkpatch errors
arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 2 +-
board/freescale/common/Makefile | 10 ++
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/fsl_ifc_spl.c | 258
+++++++++++++++++++++++++++++++
4 files changed, 270 insertions(+), 1 deletion(-)
create mode 100644 drivers/mtd/nand/fsl_ifc_spl.c
Did you use -C in git format-patch? I'd expect fsl_ifc_spl.c to be
recognized as a copy.
-Scott
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
