Dear Jon Smirl, In message <[email protected]> you wrote: > Is this one ok now? > > On Tue, Mar 24, 2009 at 11:56 AM, Jon Smirl <[email protected]> wrote: > > Add support for the Phytec phyCORE-MPC5200B-tiny. This code is from Pengu= > tronix.de but they > > didn't sign the patch.
Line too long. > > Signed-off-by: Jon Smirl <[email protected]> > > > > --- > > Makefile | > 10 + > > board/phytec/pcm030/Makefile | 50 ++++ > > board/phytec/pcm030/config.mk | 42 +++ > > board/phytec/pcm030/mt46v32m16-75.h | 54 ++++ > > board/phytec/pcm030/pcm030.c | 206 ++++++++++++++++ > > cpu/mpc5xxx/ide.c | 3 > > include/configs/pcm030.h | 463 +++++++++++++ > ++++++++++++++++++++++ > > 7 files changed, 828 insertions(+), 0 deletions(-) > > create mode 100644 board/phytec/pcm030/Makefile > > create mode 100644 board/phytec/pcm030/config.mk > > create mode 100644 board/phytec/pcm030/mt46v32m16-75.h > > create mode 100644 board/phytec/pcm030/pcm030.c > > create mode 100644 include/configs/pcm030.h Entries in MAKEALL and in MAINTAINERS missing. Except from that, it looks OK to me. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] "I've finally learned what `upward compatible' means. It means we get to keep all our old mistakes." - Dennie van Tassel _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
