This adds the definitions required to support the LCD device on the Palm Treo
680.
Signed-off-by: Mike Dunn <miked...@newsguy.com>
---
Changelog:
v3: no change
v2: no change
drivers/video/pxa_lcd.c | 32 ++++++++++++++++++++++++++++++++
1 files changed, 32 insertions(+), 0 deletions(-)
diff --git a/drivers/video/pxa_lcd.c b/drivers/video/pxa_lcd.c
index b40ec36..d5fbe7b 100644
--- a/drivers/video/pxa_lcd.c
+++ b/drivers/video/pxa_lcd.c
@@ -248,6 +248,38 @@ vidinfo_t panel_info = {
};
#endif /* CONFIG_ACX517AKN */
+#ifdef CONFIG_ACX544AKN
+
+# define LCD_BPP LCD_COLOR16
+
+/* you have to set lccr0 and lccr3 (including pcd) */
+# define REG_LCCR0 0x003008f9
+# define REG_LCCR3 0x04700007 /* 16bpp */
+
+vidinfo_t panel_info = {
+ .vl_col = 320,
+ .vl_row = 320,
+ .vl_width = 320,
+ .vl_height = 320,
+ .vl_clkp = CONFIG_SYS_LOW,
+ .vl_oep = CONFIG_SYS_LOW,
+ .vl_hsp = CONFIG_SYS_LOW,
+ .vl_vsp = CONFIG_SYS_LOW,
+ .vl_dp = CONFIG_SYS_LOW,
+ .vl_bpix = LCD_BPP,
+ .vl_lbw = 0,
+ .vl_splt = 0,
+ .vl_clor = 1,
+ .vl_tft = 1,
+ .vl_hpw = 0x05,
+ .vl_blw = 0x13,
+ .vl_elw = 0x08,
+ .vl_vpw = 0x02,
+ .vl_bfw = 0x07,
+ .vl_efw = 0x05,
+};
+#endif /* CONFIG_ACX544AKN */
+
/*----------------------------------------------------------------------*/
#ifdef CONFIG_LQ038J7DH53
--
1.7.8.6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
