This patch improves device command for selecting mmc device

Signed-off-by: Minkyu Kang <[email protected]>
---
 common/cmd_mmc.c |   69 ++++++++++++++++++++++++++++++++++++++++++++++++++----
 1 files changed, 64 insertions(+), 5 deletions(-)

diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 16c919b..2557892 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -26,20 +26,79 @@
 #include <mmc.h>
 
 #ifndef CONFIG_GENERIC_MMC
+int curr_device = -1;
+
 int do_mmc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-       if (mmc_legacy_init (1) != 0) {
-               printf ("No MMC card found\n");
+       switch (argc) {
+       case 0:
+       case 1:
+               cmd_usage(cmdtp);
+               return 1;
+       case 2:
+               if (strncmp(argv[1], "init", 4) == 0) {
+                       if (curr_device < 0)
+                               curr_device = 1;
+
+                       if (mmc_legacy_init(curr_device) != 0) {
+                               printf("No MMC card found\n");
+                               return 1;
+                       }
+
+                       printf("mmc%d is available\n", curr_device);
+                       return 0;
+               } else if (strncmp(argv[1], "dev", 3) == 0) {
+                       if (curr_device < 0) {
+                               printf("no MMC devices available\n");
+                               return 1;
+                       }
+
+                       printf("mmc%d is current device\n", curr_device);
+                       return 0;
+               }
+
+               cmd_usage(cmdtp);
+               return 1;
+       case 3:
+               if (strncmp(argv[1], "init", 4) == 0) {
+                       int dev = (int)simple_strtoul(argv[2], NULL, 10);
+
+                       if (mmc_legacy_init(dev) != 0) {
+                               printf("No MMC card found\n");
+                               return 1;
+                       }
+
+                       curr_device = dev;
+
+                       printf("mmc%d is available\n", curr_device);
+                       return 0;
+               } else if (strncmp(argv[1], "dev", 3) == 0) {
+                       int dev = (int)simple_strtoul(argv[2], NULL, 10);
+
+#ifdef CONFIG_SYS_MMC_SET_DEV
+                       if (mmc_set_dev(dev) != 0)
+                               return 1;
+#endif
+
+                       curr_device = dev;
+
+                       printf("mmc%d is now current device\n", curr_device);
+                       return 0;
+               }
+
+               cmd_usage(cmdtp);
                return 1;
        }
        return 0;
 }
 
 U_BOOT_CMD(
-       mmcinit,        1,      0,      do_mmc,
-       "init mmc card",
-       NULL
+       mmc,    3,      1,      do_mmc,
+       "MMC sub-system",
+       "mmc init [dev] - init MMC sub system\n"
+       "mmc device [dev] - show or set current device\n"
 );
+
 #else /* !CONFIG_GENERIC_MMC */
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to