Dear Fabio Estevam, > Hi, > > Running U-boot 2013.04 on my mx23evk I get: > > U-Boot 2013.04 (Apr 26 2013 - 10:44:46) > > CPU: Freescale i.MX23 rev1.3 at 454 MHz > BOOT: SSP SD/MMC #0 > DRAM: 128 MiB > MMC: MXS MMC: 0 > In: serial > Out: serial > Err: serial > Hit any key to stop autoboot: 0 > mmc0 is current device > reading boot.scr > ** Unable to read file boot.scr ** > reading uImage > 3258040 bytes read in 1112 ms (2.8 MiB/s) > Booting from mmc ... > reading imx23-evk.dtb > 20944 bytes read in 33 ms (619.1 KiB/s) > ## Booting kernel from Legacy Image at 42000000 ... > Image Name: Linux-3.8.8-fslc+g7fd77a4 > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 3257976 Bytes = 3.1 MiB > Load Address: 40008000 > Entry Point: 40008000 > Verifying Checksum ... OK > ## Flattened Device Tree blob at 41000000 > Booting using the fdt blob at 0x41000000 > Loading Kernel Image ... OK > OK > Loading Device Tree to 47b72000, end 47b7a1cf ... OK > > Starting kernel ... > > Uncompressing Linux... done, booting the kernel. > > > U-Boot 2013.04 (Apr 26 2013 - 10:44:46) > > CPU: Freescale i.MX23 rev1.3 at 454 MHz > BOOT: SSP SD/MMC #0 > DRAM: 128 MiB > > > U-Boot 2013.04 (Apr 26 2013 - 10:44:46) > > CPU: Freescale i.MX23 rev1.3 at 454 MHz > BOOT: SSP SD/MMC #0 > DRAM: 128 MiB > > (Constantly resets) > > Tried doing bisect to find out the offending commit, but I was getting > some other issues on the way masking the boot problem. > > Does anyone have any ideas? > > Thanks, > > Fabio Estevam
Did you apply that patch of mine ? Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
