Dear Fabio Estevam, > From: Fabio Estevam <[email protected]> > > On mx23 the pad voltage selection bit needs to be always '0', since '1' is > a reserved value. > > For example: > > Pin 108, EMI_A06 pin voltage selection: > 0= 1.8V (mDDR) or 2.5V (DDR1); > 1= reserved. > > Fix the pad voltage definitions for the mx23 case. > > Signed-off-by: Fabio Estevam <[email protected]> > Acked-by: Marek Vasut <[email protected]> > --- > Changes since v3: > - Add Marek's ack > Changes since v2: > - Only place PAD_3V3 inside the if/else block > Changes since v1: > - Newly introduced > > arch/arm/include/asm/arch-mxs/iomux.h | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm/include/asm/arch-mxs/iomux.h > b/arch/arm/include/asm/arch-mxs/iomux.h index 4288715..f46895e 100644 > --- a/arch/arm/include/asm/arch-mxs/iomux.h > +++ b/arch/arm/include/asm/arch-mxs/iomux.h > @@ -71,7 +71,11 @@ typedef u32 iomux_cfg_t; > #define PAD_16MA 3 > > #define PAD_1V8 0 > +#if defined CONFIG_MX28
Uh, #if defined(CONFIG_MX28) ? > #define PAD_3V3 1 > +#else > +#define PAD_3V3 0 > +#endif > > #define PAD_NOPULL 0 > #define PAD_PULLUP 1 Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
