On 06/05/2013 13:33, Benoît Thébaudeau wrote: > MUX2_CTR is on GPIO1[5], not GPIO2[5], and it needs to be set high in order to > connect the FEC. > > Signed-off-by: Benoît Thébaudeau <[email protected]> > --- > board/freescale/mx35pdk/mx35pdk.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/board/freescale/mx35pdk/mx35pdk.c > b/board/freescale/mx35pdk/mx35pdk.c > index 12e84d7..9f667d2 100644 > --- a/board/freescale/mx35pdk/mx35pdk.c > +++ b/board/freescale/mx35pdk/mx35pdk.c > @@ -245,7 +245,7 @@ int board_late_init(void) > > imx_iomux_v3_setup_pad(MX35_PAD_COMPARE__GPIO1_5); > > - gpio_direction_output(IMX_GPIO_NR(2, 5), 1); > + gpio_direction_output(IMX_GPIO_NR(1, 5), 1); > } > > val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04; >
Thanks for fixing it ! Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] ===================================================================== _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
