On 05/07/2013 01:33:11 AM, Kuo-Jung Su wrote:
From: Kuo-Jung Su <dant...@faraday-tech.com>
Faraday FTNANDC021 is a integrated NAND flash controller.
It use a build-in command table to abstract the underlying
NAND flash control logic.
For example:
Issuing a command 0x10 to FTNANDC021 would result in
a page write + a read status operation.
Signed-off-by: Kuo-Jung Su <dant...@faraday-tech.com>
CC: Scott Wood <scottw...@freescale.com>
Looks mostly OK, just a couple nits:
diff --git a/README b/README
index 0d37d56..883182d 100644
--- a/README
+++ b/README
@@ -3879,6 +3879,10 @@ Low Level (hardware related) configuration
options:
- drivers/mtd/nand/ndfc.c
- drivers/mtd/nand/mxc_nand.c
+- CONFIG_SYS_FTNANDC021_TIMING
+ Defined to tell the FTNANDC021 controller that the NAND
chip is
+ using customized timing parameters.
This makes it sound like a boolean option, but it's actually an array --
would be nice to mention what's actually expected.
+ if (mtd->writesize >= 4096) {
Whitespace
-Scott
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot