On Thu, Apr 04, 2013 at 04:40:16PM +0300, Lubomir Popov wrote: > These new functions are built for OMAP4 and OMAP5 only. The major > improvement is that the new i2c_read fixes the inability to read > correctly from certain types of I2C chips. > > - Rewritten i2c_read to operate correctly with all types of chips. > - Optimized i2c_write. Both read/write functions try to identify > unconfigured bus. > - New i2c_probe performs write access vs read. Optionally selectable > via CONFIG_I2C_PROBE_WRITE. > - Driver supports up to I2C5 (OMAP5; I2C_BASE5 must be defined). > > Signed-off-by: Lubomir Popov <[email protected]>
So, I've tested the i2c_probe on the was failing last time we tried a write-style probe and it's OK. But I'm not sure that we're obeying the comments I spell out in 168a5acb81a8d92a7effcb2727aaa89367b97e05 about why we can't do a write-style probe all the same. Can you be sure we're following the constraints there? Thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
