Dear [email protected], In message <[email protected]> you wrote: > From: Ying Zhang <[email protected]>
You mark this patch as V2 but there is no history of changes. Please always include information what exactly was changed. > There will clear the BSS in the function clear_bss(), the reset address of > the BSS started from the __bss_start, and increased by four-byte increments, > finally stoped depending on the adress is equal to the _bss_end. If the end > address __bss_end is not alignment to 4byte, it will be an infinite loop. > > The end address of the bss should be 4byte aligned. NAK. This is the wrong way to fix this. Instead, the test in the loop should be fixed to test for "<=". > /* > - * (C) Copyright 2006 > + * (C) Copyright 2013 > * Wolfgang Denk, DENX Software Engineering, [email protected] And PLEASE do not mess with _my_ copyrights!!! Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] God runs electromagnetics by wave theory on Monday, Wednesday, and Friday, and the Devil runs them by quantum theory on Tuesday, Thurs- day, and Saturday. -- William Bragg _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
