Hi Albert,
On Tuesday, May 14, 2013 11:50:27 AM, Albert ARIBAUD wrote:
> Signed-off-by: Albert ARIBAUD <[email protected]>
> ---
> Changes in v2:
> - dropped relocate_code() call from mx31pdk SPL
>
> board/freescale/mx31pdk/mx31pdk.c | 16 +++++++++++++++-
> 1 file changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/board/freescale/mx31pdk/mx31pdk.c
> b/board/freescale/mx31pdk/mx31pdk.c
> index 49158bd..4f6cfee 100644
> --- a/board/freescale/mx31pdk/mx31pdk.c
> +++ b/board/freescale/mx31pdk/mx31pdk.c
> @@ -39,7 +39,21 @@ DECLARE_GLOBAL_DATA_PTR;
> #ifdef CONFIG_SPL_BUILD
> void board_init_f(ulong bootflag)
> {
> - relocate_code(CONFIG_SPL_TEXT_BASE);
> + /*
> + * copy ourselves from where we are running to where we were
> + * linked at. Use ulong pointers as all addresses involved
> + * are 4-byte-aligned.
> + */
> + ulong *start_ptr, *end_ptr, *link_ptr, *run_ptr, *dst;
> + asm volatile ("ldr %0, =_start" : "=r"(start_ptr));
> + asm volatile ("ldr %0, =_end" : "=r"(end_ptr));
Why not __image_copy_start/end instead? I know that the result will be the same
here, but the naming would be more appropriate. The existing u-boot-spl.lds
still gives access to __image_copy_*.
> + asm volatile ("ldr %0, =board_init_f" : "=r"(link_ptr));
> + asm volatile ("adr %0, board_init_f" : "=r"(run_ptr));
> + for (dst = start_ptr; dst < end_ptr; dst++)
> + *dst = *(dst+(run_ptr-link_ptr));
> + /*
> + * branch to nand_boot's link-time address.
> + */
> asm volatile("ldr pc, =nand_boot");
> }
> #endif
> --
> 1.7.10.4
Best regards,
Benoît
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
