Hi Gilles, On 16/05/13 01:31, Gilles Chanteperdrix wrote: > On 05/15/2013 05:55 PM, Lubomir Popov wrote: > >> Prerequisites: appropriate patches to the USB EHCI and Eth >> drivers, and to the OMAP5 clock register definitions. > > > Hi Lubomir, > > I have been trying to get the USB working on omap5 uEVM yesterday. In > addition to your code, I added the changes necessary to pinmux the 79 > and 80 GPIOS correctly, but it does not seem to work. I suspect there is > something else missing than simply USB specific bits, because when the > ethernet phy is supposedly out of reset, the ethernet leds keep turned > off. I was thinking about checking the PMIC registers. PMIC wouldn't be related.
Did you pull the current u-boot master and then apply the following patches before testing? Eager to know ;) http://patchwork.ozlabs.org/patch/232742/ http://patchwork.ozlabs.org/patch/244100/ > > Regards. > Best regards, Lubo _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
