On Thu, May 16, 2013 at 04:36:02PM +0200, Peter Korsgaard wrote:
> >>>>> "Tom" == Tom Rini <tr...@ti.com> writes:
> 
>  Tom> From: Steve Kipisz <s-kipi...@ti.com>
>  Tom> NOR requires that s_init be within the first 4KiB of the image so that
>  Tom> we can perform the rest of the required pinmuxing to talk with the rest
>  Tom> of NOR that we are found on.  When NOR_BOOT is set we save our
>  Tom> environment in NOR at 512KiB and a redundant copy at 768KiB.  We avoid
>  Tom> using SPL for this case and u-boot.bin is written directly to the start
>  Tom> of NOR.
[snip]
>  Tom> -#ifdef CONFIG_SPL_BUILD
>  Tom> +#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
>  Tom> +#ifdef CONFIG_TI81XX
>  Tom>  static struct dmm_lisa_map_regs *hw_lisa_map_regs =
>  Tom>                                 (struct dmm_lisa_map_regs *)DMM_BASE;
>  Tom> +#endif
>  Tom>  static struct vtp_reg *vtpreg[2] = {
>  Tom>                                 (struct vtp_reg *)VTP0_CTRL_ADDR,
>  Tom>                                 (struct vtp_reg *)VTP1_CTRL_ADDR};
>  Tom> @@ -53,6 +55,7 @@ static struct vtp_reg *vtpreg[2] = {
>  Tom>  static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
>  Tom>  #endif
>  
>  Tom> +#ifdef CONFIG_TI81XX
> 
> Why are you adding the TI81XX dependency here? That doesn't have
> anything to do with nor boot, does it?

dmm is TI81XX-only (for this file, it's also omap4+) and since main
U-Boot doesn't use --ffunction-sections/--fdata-sections/--gc-sections
we end up with a link error about not having enable_dmm_clocks().  This
is OK on SPL since we do use --gc-sections and the link error is avoided
as we discard config_dmm on am33xx builds.

-- 
Tom

Attachment: signature.asc
Description: Digital signature

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to