There is no other call other than spi_flash_cmd_wait_ready(),
hence removed spi_flash_cmd_poll_bit and use the poll status code
spi_flash_cmd_wait_ready() itself.

Signed-off-by: Jagannadha Sutradharudu Teki <[email protected]>
---
Changes for v2:
        - none

 drivers/mtd/spi/spi_flash.c          | 11 +++--------
 drivers/mtd/spi/spi_flash_internal.h |  4 ----
 2 files changed, 3 insertions(+), 12 deletions(-)

diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 765d4bc..527423d 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -190,12 +190,13 @@ int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 
offset,
        return ret;
 }
 
-int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout,
-                          u8 cmd, u8 poll_bit)
+int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
 {
        unsigned long timebase;
        int ret;
        u8 status;
+       u8 poll_bit = STATUS_WIP;
+       u8 cmd = CMD_READ_STATUS;
 
        timebase = get_timer(0);
        do {
@@ -220,12 +221,6 @@ int spi_flash_cmd_poll_bit(struct spi_flash *flash, 
unsigned long timeout,
        return -1;
 }
 
-int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
-{
-       return spi_flash_cmd_poll_bit(flash, timeout,
-               CMD_READ_STATUS, STATUS_WIP);
-}
-
 int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len)
 {
        u32 erase_size;
diff --git a/drivers/mtd/spi/spi_flash_internal.h 
b/drivers/mtd/spi/spi_flash_internal.h
index 455dc02..ac4530f 100644
--- a/drivers/mtd/spi/spi_flash_internal.h
+++ b/drivers/mtd/spi/spi_flash_internal.h
@@ -98,10 +98,6 @@ int spi_flash_cmd_bankaddr_read(struct spi_flash *flash, 
void *data);
 int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
                size_t cmd_len, void *data, size_t data_len);
 
-/* Send a command to the device and wait for some bit to clear itself. */
-int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout,
-                          u8 cmd, u8 poll_bit);
-
 /*
  * Send the read status command to the device and wait for the wip
  * (write-in-progress) bit to clear itself.
-- 
1.8.3


_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to